Portable Mini Manual Sewing Machine Simple Operation Sewing Tools Sewing Cloth Fabric Handy Needlework Tool

• Compact and Portable :This mini sewing machine is designed for easy portability, perfect for travel or outdoor use. Its compact size makes it an ideal tool for DIY stitching and needlework. • Manual Feed Mechanism :The manual feed mechanism of this sewing machine allows for precise control over the fabric, ensuring smooth and efficient sewing every time. • Lock Stitch Formation :The lock stitch formation feature ensures durable and long-lasting stitches, enhancing the overall quality of your sewing projects. • Mechanical Configuration – Flat-Bed :The flat-bed mechanical configuration of this sewing machine provides a large workspace, making it suitable for various sewing tasks. • Origin – Mainland China :Originating from Mainland China, this sewing machine reflects high-quality craftsmanship and reliable performance. • Type – Mini Sewing Machine :As a mini sewing machine, it offers all the essential functions of a full-size machine in a more compact and convenient package.

Features: Accessories: sewing machine*1 , long thread rod*1, needle threader*1. Box size: 48.5*31*47cm Carton: 160PCS for plating model Whole box weight: about 19kg Sewing thread: big red, purple pink, white blue 4 colors random delivery. The correct way to use the miniature sewing machine: 1、Holding the machine: use the four fingers of your right hand to hold the seat, and naturally place your thumb on the top of the top cover of the machine body to hold the whole machine smoothly. 2、Threading：Pull out the thread on the bobbin gently. Pass through the lead wire Figure A, and then introduce the clamping line adjustment piece B. And then through the lead wire loop. C. Lead through the thread temporarily placed next to the needle, another threader from the front of the needle (to the body of the combination of) through the needle hole, and then introduce the thread into the threader small holes, exit the threader to pull out the head of the line about 2-3 centimeters pressure plate pressure can be used! 3, put the fabric: with the right index finger lift up the pressure plate, will be ready to sew the fabric (thickness of not more than 0.8 mm) flat into the pressure plate, gently put back the pressure plate to press the fabric; 4、Sewing operation: hold the fabric with the left hand, the right thumb gently and quickly press down the top of the upper cover to the bottom, then press down again with the thumb, and so on and so forth, the fabric feeding mechanism automatically sends the sewn object to the left. The right hand gradually moves to the right, and the left hand holds the fabric and gently moves the sewed object to the left in accordance with the sewing rhythm until the end of sewing; 5. Finish: When sewing is finished, cut the thread with scissors and gently pull up the presser to remove the fabric. From the opposite side of the fabric being sewn, pull out the thread, make it wear into the next section of the coil to pull it tight and tie a knot, the stitches will be firm, do not pull the fabric in a hard way to pull off the thread at the end of sewing, so as to avoid pulling the bad needles and stitches; 6, the machine can automatically feed the fabric and adjust the tightness between the pins, but it is necessary to pay attention to the following points: A. The pin is too tight, the pressure nut slightly counterclockwise; B. Pin too loose, the pressure nut slightly clockwise adjustment; The correct pin tension is shown. If you need a larger stitch, the left hand can pull the fabric a little faster. If you need a denser stitch, the left hand can pull the cloth a little slower; 7, change the ball of thread; such as the replacement of large ball of thread, you can spare the extension rod and thread cylinder shaft connection, set into the large ball of thread. The spare plastic cap placed on the end of the rod to fix the large thread ball, and then re-threading, adjust the line tension after sewing; use 50 # - 90 # cotton thread or synthetic thread works well; 8, change the needle: loosen the set screw, remove the broken needle. Shown to install a new needle, pay attention to the flat side of the needle is facing the fixing screws, can not be installed in reverse!