Rockford Fosgate R2S-1X10 10" 400W Car Subwoofer + Box + 550W 2-Ch Amp + Amp Kit

Rockford Fosgate R2S-1X10 10" 400W Car Subwoofer + Box + 550W 2-Ch Amp + Amp Kit
Rockford Fosgate R2S-1X10 10" 400W Car Subwoofer + Box + 550W 2-Ch Amp + Amp Kit

Model: R2S-1X10

Brand: Rockford Fosgate

(1) 1 shops 0 products

Detailed product description

**Package Includes:** 1 x Rockford Fosgate R2S 1X10 10" 400W Car Subwoofer + Enclosure 1 x Renegade REN550S 550W 2 Channel Car Amplifier 1 x SoundStorm AKS8 8 Gauge Complete Amplifier Installation Kit The **Rockford Fosgate R2S 1X10** subwoofer is a single 10? shallow enclosure with 200 Watts RMS power handling wired to a 2 Ohm load. The enclosure is constructed with 5/8? MDF, covered in high density carpet, and features quick release compression terminals.The **Renegade REN550S** 2 channel amplifier features a MAX power handling of 550 watts at 2 ohms and a RMS power handling of 270 watts at 2 ohms. This amplifier features a MOSFET power supply which has higher switching speed than other transistors which make it great for power amplifiers. 2 Channel amplifiers are commonly used to power two speakers or low powered subwoofers.The Class AB means that the amplifier uses 50% of the input signal while the other percentage is turned ?off?. These amplifiers run cooler and more efficiently with low distortion and high reliability.Not only is the Shaker Series Amplifier Installation Kit a true lifesaver, but it also is designed to make your entire sound system work at peak performance. If you want your amplifier to operate at its best you simply cannot use inferior parts and accessories. Our exclusive, pre selected set of tools includes CopperCure highly conductive copper wires that are oxygen free to ensure clean and consistent power transfer.**We are an authorized Rockford Fosgate & Renegade dealer**

**Subwoofer:** New Rockford Fosgate R2S 1X10 10" 400 Watts Shallow Car Subwoofer Sub Enclosure Power Handling: 200 Watts RMS MAX Power: 400 Watts Constructed with 5/8" MDF Covered with high density carpet High current binding posts Nominal Impedance (ea): 2 Ohm Internally wired to create a 2 Ohm amplifier load System Configuration: Sealed Enclosure Material: 5/8" MDF Speaker Connector: Up to 12 AWG Compression Terminals CEA 2031 Compliant Shipping Weight: 19.9 Lbs (9.02 Kg) Dimensions: 13.5" x 19.0" x 5.25" (bottom) x 3.25" (top) 34.29cm x 48.26cm x 13.34cm (bottom) x 8.25cm (top) Condition: Brand New! Part Number **R2S 1X10** 1 Year Manufacturer Warranty **Amplifier:** New Renegade REN550S 550 Watt 2 Channel Class AB Car Audio Power Amplifier Amp 2 x 75 Watts RMS into 4 Ohms 2 x 135 Watts RMS into 2 Ohms 2 x 150 Watts Max. into 4 Ohms 2 x 275 Watts Max. into 2 Ohms MOSFET Power Supply High level Inputs RCA In and Outputs 2 Ohm Stability Mono bridegable Tri Mode Operation Loudspeaker impedance (stereo): 2 16 Ohm Frequency response: 20 30 kHz Total harmonic content (THD & N): >0,5% Channel separation: >50 dB Signal to noise ratio: >80 dB Input sensitivity: 0.1 4 Volts Input impedance: 10 kOhms Supply: +12 V (10 15 V) Fuse: 1 x 30 A High pass filter 80 2000 Hz Low pass filter 50 250 Hz Bass Boost Switch 0/+6/+12 db Dimensions: 255 x 55 x 200/230 mm Condition: Brand New! Part Number: **REN550S** Item Weight: 5.5 lbs. 1 Year Manufacturer Warranty **Amp Kit:** New VM Audio SRPK4R **4 Gauge Amplifier Complete Wiring Kit** Maximum of 2000 watts Complete amplifier wiring kit with cables, connectors and accessories 4 Gauge high current power cables with 315 multi stranded bare copper 4 Gauge high current ground cables with 315 multi stranded bare copper 18 Gauge remote turn on wire with solid red insulation jacket 12 Gauge high density two conductor copper speaker wire with clear red insulation jacket E.M.I isolated RCA audio cables with maximum surface contact connection and exclusive VM audio barrel grip Nickel plated, high impact resistant 60 AGU fuse holder with exclusive 4 Gauge maximum wire to surface current flow directivity 4 Gauge nickel plated power/ground solder less ring crimp terminals 4 Gauge nickel plated power/ground solder less spade crimp terminals Quick connect nickel plated crimp speaker wire connector Element protection power cable loom jacket High quality insulated solder less crimp butt terminals Durable high strength nylon tie wraps Kit includes: 16 Ft red 4 gauge power wire 3 ft black 4 gauge ground wire 15 ft high performance RCA wire 4 Gauge In line AGU fuse holder 60 Amp AGU fuse 15 ft 18 Gauge Remote wire 20 ft 12 gauge Speaker wire 20) 6" wire ties 2) spade connectors 2) ring connectors 3) screws 3) butt connectors 4) fasten connectors 5) spade connectors Cable firewall black rubber grommets Product Condition: Brand New Part Number: **SRPK4R** 1 Year Manufacturer Warranty


Compare buying offers


Search
Amazon Amazon

Currently Unavailable - Out of Stock

We don't know when or if this item will be back in stock. Please check back later for updates.

Product specifications

Technical details

Manufacturer -
Brand Rockford Fosgate
Item model number R2S-1X10
Color Black
Weight -
Height -
Depth -

Additional product information

Product Id 1794899
User Reviews and Ratings 3 (1 ratings) 3 out of 5 stars
UPC 744271356687

Compare buying offers


# Title Reviews User Ratings Price
1
Search on Amazon
Price:
Search on Amazon
Search on Amazon

Similar Products View All


arrow_upward