SEM Products 39153 Bumper Ford Charcoal- Aerosol

SEM 39153,Ford Charcoal, Bumper Coater 12 Oz Aerosol; SEM Bumper Coater paint is currently available in 17 OEM colors to match most contrasting domestic and foreign bumpers. Preparation: Repair any areas that may have damage. Wash part thoroughly with soap and water. Clean with SEM 38353 Plastic & Leather Prep. Remove any loose paint and sand with 400 grit sandpaper. Mask off all areas not to be coated to protect from overspray. Apply light mist coats evenly allowing 5-10 minutes between coats. Several thin coats are better than 1 heavy coat. Note: Don't rush to install the part. Bumper Coater adhesion improves with time. Full hardness should be obtained in 48 hours.

No adhesion promoter required No primer required Excellent adhesion and durability Matches OEM appearance Retains flexibility Great coverage Professional results