Sole Performance Thin InSoles

SOLE Performance Thin Insoles The SOLE Performance Thin Insoles are both heat and wear moldable to create a custom fit for your unique foot shape. With a semi-rigid orthotic arch support, SOLE has collaborated with two-time world champion skier, Chris Davenport, to design a thin cork shoe insole that is perfect for tight-fitting and/or low-profile footwear such as ski boots, cycling shoes, and cleats. They feature a heel cup with arch support to not only improve your balance, but helps to distribute weight and pressure evenly across your whole foot with minimal padding to provide support for your feet without adding bulk to your shoes. Product Features: Semi-rigid orthotic arch support insoles Full-length footbed Heat and wear moldable to accommodate all foot shapes Lightweight support Heel cup and arch support improves balance and promotes natural foot alignment Distributes weight and pressure equally across foot Moldable recycled cork base Polygiene odor control technology Moisture-wicking top coat Eco-friendly with a 100% recycled wine cork base Accepted by the American Podiatric Medical Association Vegan Latex Free Trim-to-fit Arch height: 25 mm Thickness at forefoot: 3.25 mm Thickness at heel: 6 mm Weight: 2.0 oz (Men's 8.5-9 / Women's 10.5-11) Ideal For: Activity type: Running & Walking, Standing, Golf, Cycling, Football and Soccer, Casual Shoe type: Athletic, Boots, Casual Arch type: All Arches Pain relief: Achilles Tendinitis, Arch Pain & Arch Strain, Flat Feet & Fallen Arches, High Arches, Over Pronation, Plantar Fasciitis, Shin Splints, Supination Wear Moldable Instructions: Remove existing factory sock liners from shoe. Insert SOLE footbeds into shoes and wear as normal. Footbed will adapt to your foot after some time of regular wear. Heat Moldable Instructions: Pre-heat oven to 200 degrees Fahrenheit/90 degrees Celsius. If possible, remove existing sock liner from footwear. If necessary, trim footbeds to fit by using old sock liner as a guide. Put footbeds into pre-heated oven on a baking sheet. Leave in oven for 2 minutes or until Opti-therm indicator turns black. If indicator does not turn black and 3 minutes has passed, remove footbeds from oven. Remove footbeds from oven and immediately place inside footwear - be sure the insole lays flat and is not bunched up. Step into shoes right away and if shoes have laces, lace up shoes as you normally would. Stand up straight and hold position for 2 minutes. After 2 minutes, you will have customized support specific to your feet. Item #: SSI-P0 Check out our SOLE Heat Moldable Video to learn how to heat mold your new SOLE footbeds!Quick Overview: The SOLE Performance Thin Insoles are a semi-rigid orthotic arch support that is both wear or heat-moldable for a custom fit. They are designed for tighter fitting footwear while providing the proper support and comfort needed.

SOLE Performance Thin InsolesThe SOLE Performance Thin Insoles are both heat and wear moldable to create a custom fit for your unique foot shape. SOLE has collaborated with two-time world champion skier, Chris Davenport, to design a thin cork shoe insole that is perfect for tight-fitting and/or low-profile footwear such as ski boots, cycling shoes, and cleats. These insoles feature a semi-rigid arch support and minimal padding to provide support for your feet without adding bulk to your shoes.Product Features: Heat and wear moldable to accommodate all foot shapes Lightweight support Heel cup and arch support improves balance and promotes natural foot alignment Distributes weight and pressure equally across foot Moldable recycled cork base Polygiene odor control technology Moisture-wicking top coat Eco-friendly with a 100% recycled wine cork base Accepted by the American Podiatric Medical Association Vegan Latex Free Thickness at forefoot: 4mm (Mens 11) Thickness at heel: 5mm (Mens 11) Arch height: 35mm (Mens 11) Weighs: 2.2oz (Mens 11) Ideal For: Activity type: walking, running, golf, cycling, standing, winter sports, casual, football, soccer Shoe type: athletic, casual, boots Arch type: all arch types Pain relief: plantar fasciitis, over-pronation, achilles tendonitis, arch pain/strain, shin splints, supination, flat feet, high arches Wear Moldable Instructions: Remove existing factory sock liners from shoe. Insert SOLE footbeds into shoes and wear as normal. Footbed will adapt to your foot after some time of regular wear. Heat Moldable Instructions: Pre-heat oven to 200 degrees Fahrenheit/90 degrees Celsius. If possible, remove existing sock liner from footwear. If necessary, trim footbeds to fit by using old sock liner as a guide. Put footbeds into pre-heated oven on a baking sheet. Leave in oven for 2 minutes or until Opti-therm indicator turns black. If indicator does not turn black and 3 minutes has passed, remove footbeds from oven. Remove footbeds from oven and immediately place inside footwear - be sure the insole lays flat and is not bunched up. Step into shoes right away and if shoes have laces, lace up shoes as you normally would. Stand up straight and hold position for 2 minutes. After 2 minutes, you will have customized support specific to your feet. Item #: SSI-P0