Spectrum Brands Remington MicroFlex Replacement Heads & Cutters, 1 ea

Replacement Heads & Cutters 1 each SP-16. Important: SP-16 replacement heads and cutters fit Remington Dry Models R-830, R-835, R-842, R-845, R-850, R-860, R-870, R-872, R-875, R-890 and Wet/Dry Model R-856 Rotary MicroFlex shavers only. To Remove Heads and Cutters: 1. For Wet/Dry model push the cutter head housing release button allowing the assembly to pivot open. For Dry shavers, grip the cutter head housing and pull upward from shaver. 2. Remove the cutter retainer assembly by unscrewing the center screw knob from the cutter head housing. 3. Remove the head/frame assembly by pulling it out of the housing. To Replace Heads and Cutters: 1. Replace the new cutter and head frames making sure that the frames are placed into the housing with the head frame pins and the cutter frame locating holes aligned as indicated. 2. Tighten the screw knob to hold frames in place. 3. Close the housing assembly. Make sure the housing is latched or clicked into place. 4. Make sure to keep the plastic head guard in place while shaver is not in use to protect heads. Do not push on the heads while replacing to avoid damaging them. 1 each 60 Main Street Bridgeport, CT 06604 800-736-4648 2002 R.P.C., L.L.C.

Replacement Heads & Cutters SP-16. Important: SP-16 replacement heads and cutters fit Remington Dry Models R-830, R-835, R-842, R-845, R-850, R-860, R-870, R-872, R-875, R-890 and Wet/Dry Model R-856 Rotary MicroFlex shavers only.