SUNLU 3D Printer Filament TPU 1.75mm,Dimensional Accuracy +/- 0.03 mm,0.5kg/Spool,TPU 1.75mm (White Color)

SUNLU 3D Printer Filament TPU 1.75mm: Made from strong yet flexible TPU which is easy to use and provides an excellent layer-to-layer connection. Resists oil, grease and scratches, withstands even more stringent wear and tear Allows you to print shoe insoles, phone cases, sporting goods, medical equipment and vehicle instrument panels.

Brand SUNLU Material Thermoplastic Polyurethane Color 0.5kg White Item Weight 1.1 Pounds Item Diameter 1.75 Millimeters --- ①【TPU 3D Printing Filament】TPU filament is made of flexible thermoplastic polyurethane, like rubber. Very suitable for printing keyrings, insoles, mobile phone cases, etc.! ②【Excellent Printed Results】SUNLU TPU filament has excellent layer adhesion, very easy to print. TPU filament is wear-resistant, oil-resistant, good elasticity, anti-aging, color, no bobble. ③【TPU Recommend Settings】We recommend printing at a Nozzle temperature of 205°C - 230°C (401°F - 446°F) and Bed temperature of 0°C - 60°C (0°F - 140°F), printing speed is 0 - 40mm/s. ④【TPU 1.75mm Diameter】Dimensional Accuracy +/- 0.03mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers. ⑤【SUNLU Spool Diameter】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers. --- FAQ Why can't the filaments stick to the hotbed easy? 1). Check the temperature setting before printing, TPU filament temperature about 205-230°C; 2). Check if the plate surface has been used for a long time, it is recommended to apply PVA glue; 3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; --- Tips: 1).Please make 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture. 2).Be sure to insert the free end of the TPU filament into the holes to avoid being tangled for next time use. 3). If there is no print plan within a few days, retract the filament to protect the printer nozzle.