SUNLU PETG 3D Printer Filament 1.75mm,Dimensional Accuracy +/- 0.02 mm,1 kg/Spool,White Color

Environmentally friendly and non-toxic; Bright color; Low shrinkage; Good toughness, not easy to be brittle. Good acid and alkali resistance, excellent toughness, weather resistance, good adhesion；Good dimensional stability, no cracks and warpage; High transparency, good gloss; Suitable for all types of FDM3D printers, suitable for printing commonly used models, handicrafts, industrial parts, advertising characters, etc.

Parameter: Wire diameter: 1.75 mm Tolerance: ±0.02MM; Printing temperature: 220-250℃ Bottom plate temperature: Glue is required when not heated. Glue is not required when heat to 70-80℃; Rally (KGF): 8-14; Melt index: 6-11g/10min (220℃, 2.16Kg); Elongation at break: 210%; Printing speed: 50-100MM/s Air bubbles: 100% zero bubbles, Net weight: 1 KG/roll, Gross weight: 1.3 KG/roll; Length: 1.75MM(1KG)=320M 3D Printer Filament Storage Tips: We recommended storing filament in a sealed plastic bag or box after each print (a large ziplock or Tupperware works well). In extreme cases where the filament gets damp, you can bake it in an oven with 50-degree Celsius for about an hour to restore its dryness. Each time after use of your 3D Printer Filament. Be sure to insert the free end of the filament into the hole to avoid the filament being tangled for next time use