SUNLU Silk PLA+ 3D Printer Filament,1.75mm,Bundle,2.2LBS/roll,Accuracy +/-0.02mm,Red Copper and White

SUNLU Shiny Silk PLA Smooth and shiny finish like real silk, no extra polishing needed, printing at a high detail results in a beautiful finish. SUNLU high quality silk PLA filament brings arts & crafts and 3D projects smooth shiny silk-like surface which definitely gives an eye-popping result!

Brand SUNLU Material Polylactic Acid Color 1kg Silk White & 1kg Silk Red Copper Item Weight 4.4 Pounds Item Diameter 1.75 Micron --- About this item 【Shiny Silk PLA】 Smooth and shiny finish like real silk, no extra polishing needed, printing at a high detail results in a beautiful finish. SUNLU high quality silk PLA filament brings arts & crafts and 3D projects smooth shiny silk-like surface which definitely gives an eye-popping result! 【Dimensional Accuracy & Consistency】These tough SILK PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration; 1 kg spool (2.2lbs) 【Clog-Free, Bubble-Free & Easy-to-use】Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 210-220℃, bed 60-70℃ . 【Wide Compatibility】 --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm. 【Risk-Free】 --- One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20" --- FAQ Why can't the filaments stick to the hotbed easy? 1). Check the temperature setting before printing, SILK PLA filament temperature about 220-230℃; 2). Check if the plate surface has been used for a long time, it is recommended to apply PVA glue; 3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; --- Tips: 1).Please make 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture. 2).Be sure to insert the free end of the SILK PLA filament into the holes to avoid being tangled for next time use. 3). If there is no print plan within a few days, retract the filament to protect the printer nozzle.