TangTag Hot Glue Gun, 30W Mini Heating Hot Melt Glue Gun Kit with 50pcs Melt Glue Sticks and on/Off Switch for School DIY Arts & Crafts Projects, Home/Office Quick Repairs, Festival Decorati

Many Cool Things You Can Do with TanTag hot glue gun! Easy to Operate: 1. Insert one glue stick into the gun tail 2. Plug in and switch on, the LED indicator will light up 3. Preheat for 3-5 minutes 4. Pull the trigger to extrude glue Specification: Power: 30W Preheating Time: 2-3 minutes Cable Length: 160cm Nozzle Internal Diameter: 1.5mm/ 0.59in Warm Tips: 1. The glue gun can only use 7mm diameter melt(mini size). If sizes are not suitable, it will lead glue to back flow and damage the glue gun. 2. Don't pull out the glue stick from the back of the gun. If there is half-used glue stick in the gun, just feed in another new one behind it and it?ll continue to feed through the new glue stick smoothly. 3. Since the gravity and the Residual heat, it's normal to have a little glue drop. So don't worry. Please turn off and use the holder to keep the nozzle downward within 3-5 min in advance. 4. A new glue gun when first used. It may emit a small amount of smoke, which is normal and should stop after a few seconds. 5. Do not touch the nozzle area while using the gun. Even if the gun is unplugged, it will take some time for the nozzle area to cool. 6. Do not store or use the glue gun in damp or wet conditions. 7. If the glue gun don?t need work continuously for 15 minutes, please cut off the power supply. 8. Do not disassemble or modify the glue gun.

TangTag Hot Glue Gun, 30W Mini Heating Hot Melt Glue Gun Kit with 50pcs Melt Glue Sticks and on/Off Switch for School DIY Arts & Crafts Projects, Home/Office Quick Repairs, Festival Decorati