Tech 21 PBDR SansAmp Programmable Bass Driver DI Preamp with Instrument Polishing Cloth

Tech 21 PBDR SansAmp Programmable Bass Driver DI Preamp with Instrument Polishing Cloth

TECH 21 SansAmp Programmable Bass Driver DI Pedal for Bass Guitar with Powerful EQ and Drive Sections and 3 Programmable Presets with Polishing Cloth Condense your bass rig into a stombox with the SansAmp Programmable Bass Driver DI Pedal by Tech 21. Using the footswitches you can instantly recall 3 custom presets for different sounds. Sounds can be created on the fly by adjusting the pedal's drive, EQ, and level controls, which, when combined with the SansAmp amplifier emulation, provide a wide array of tonal choices to cover you on any gig.Adding to the pedal's versatility is the output selection. Having multiple outputs allows for mixing and matching signal chain options. For example on a live stage, you can send a balanced DI signal to the mixing board or console while using the low-Z or parallel 1/4 outputs to route the signal back to your amp for real-time monitoring. Low-Z outputs can drive long cable lengths without signal deterioration, ensuring your bass signal arrives without attenuated high-frequencies or excess noise. For going direct to a mixing board or studio console, the XLR terminal on the SansAmp Bass Driver DI outputs a balanced signal and can receive 48V phantom power from the mixing board or studio console to fully power the pedal and all of its functions.Always thinking of our fat-stringed brethren, we had to make a 3-channel, programmable, rig-in-a-box for bassists who can't get enough of a great thing. Like the TRI-A.C for guitar, you get three hot tones right at your toetips. The all-analog circuitry features the same controls as its single channel predecessor: Drive, Bass, Treble, Presence, Blend and Level. Digital only in its programmability, you just tweak the knobs until you find a tone, double-tap on a footswitch, and it's saved in that channel. It's that simple. Three of your faves to go! Features The SansAmp Programmable Bass Driver DI Pedal by Tech 21. Using the footswitches you can instantly recall 3 custom presets for different sounds. Sounds can be created on the fly by adjusting the pedal's drive, EQ, and level controls, which, when combined with the SansAmp amplifier emulation, provide a wide array of tonal choices to cover you on any gig TECH 21 SansAmp guitar pedal Having multiple outputs allows for mixing and matching signal chain options. For example on a live stage, you can send a balanced DI signal to the mixing board or console while using the low-Z or parallel 1/4 outputs to route the signal back to your amp for real-time monitoring. Low-Z outputs can drive long cable lengths without signal deterioration, ensuring your bass signal arrives without attenuated high-frequencies or excess noise. Speaker Simulation - Within the tube amplifier emulation circuitry is a speaker simulator which models a multi-miked bass cabinet. The tonal response is smooth and precludes the possible peaks, valleys, and notches associated with single-miking techniques. Lazy Pot Adjustment - This is a safety feature engineered for the Drive and Level controls. When you unlock the EQ settings, for instance, they will jump to the new setting of the knob position. For the Drive and Level controls, however, this could result in you jumping out of your skin if they're at a high setting. With the Lazy Pot, there's a gradual increase to the new setting position, giving you time to turn it down. Presets -Easily store a preset by double-tapping a channel's footswitch. When you turn a knob from its stored position, a channel indicator LED will blink. The slower the blink, the farther away you are from the preset point, and vice versa. The LED will stop blinking and remain on at the preset point.??