Tire Grip Adhesive Spray

Some cities and even entire states prohibit the use of chains or other traction devices on their infrastructure. This is because of the damage these devices are known to inflict, from potholes to deep cracks and chips. You might not need chains in a state that doesn't experience intense driving conditions, but you'll still run into situations where your tires just don't stick. The beauty of Tyre-Grip? is that it is one of the few traction devices that poses no danger to highway and local road infrastructures. Tyre-Grip? is a thin resin film that is applied to your tires, which makes it harmless to road surfaces. Even more importantly, it does not run the risk of damaging your own drive train normally associated with chains or other traction devices. This last note is of particular importance when you factor hybrid cars in the equation. Most hybrid manufacturers will explicitly void warranties on their cars when chains and other traction devices are used. The drive trains on these vehicles are so sensitive that chains can generate ruinous damage. Using Tyre-Grip? gives you an incredible traction alternative. Comes in a 16oz. or 7oz. recyclable aluminum can. Lasts 20+ applications / All four tires. Improves traction on tire treads up to 300% on slippery wet surfaces, black ice, sleet, and snowy roads, stated by the Norwegian State Technological Institute. Causes no physical or chemical affect to the body paint, metal, or tires on the car. Retains its effectiveness for approximately (50) miles. Natural Resin Adhesive. Three times normal grip on wet (or black) ice at around +3 C (37.4°F). Grip increases during near freezing temperatures. "So the colder it gets the stronger it grips". Reduces the risk of auto accidents due to hazardous road conditions. Enhances the effectiveness on snow tires. Can be conveniently stored in the trunk of your car for immediate access. Causes no damage to roads or driveways. According to Norwegian State Tech. Institute, under normal driving conditions it may not cause wheel lock or wheel spin. Environmentally safe. Contain no harmful solvents. Dimensions: 4" H x 6" W x 4" D.- SKU: ZX9BG140

Some cities and even entire states prohibit the use of chains or other traction devices on their infrastructure. This is because of the damage these devices are known to inflict, from potholes to deep cracks and chips. You might not need chains in a state that doesn't experience intense driving conditions, but you'll still run into situations where your tires just don't stick. The beauty of Tyre-Grip? is that it is one of the few traction devices that poses no danger to highway and local road infrastructures. Tyre-Grip? is a thin resin film that is applied to your tires, which makes it harmless to road surfaces. Even more importantly, it does not run the risk of damaging your own drive train normally associated with chains or other traction devices. This last note is of particular importance when you factor hybrid cars in the equation. Most hybrid manufacturers will explicitly void warranties on their cars when chains and other traction devices are used. The drive trains on these vehicles are so sensitive that chains can generate ruinous damage. Using Tyre-Grip? gives you an incredible traction alternative. Comes in a 16oz. or 7oz. recyclable aluminum can. Lasts 20+ applications / All four tires. Improves traction on tire treads up to 300% on slippery wet surfaces, black ice, sleet, and snowy roads, stated by the Norwegian State Technological Institute. Causes no physical or chemical affect to the body paint, metal, or tires on the car. Retains its effectiveness for approximately (50) miles. Natural Resin Adhesive. Three times normal grip on wet (or black) ice at around +3 C (37.4°F). Grip increases during near freezing temperatures. "So the colder it gets the stronger it grips". Reduces the risk of auto accidents due to hazardous road conditions. Enhances the - SKU: ZX9BG140