Tycon Systems RPDC12-9-10 Remotepro 2.5W Continuous Remote Power System

The RemotePro series outdoor power systems are designed for applications that require a primary off-grid power source to run various electronics. The sealed and weatherproof enclosures have extra space inside for customer electronics. All enclosures are hinged and gasket sealed. The PL enclosure can accept a padlock or tamper seal. The ST enclosure is equipped with 2 tamper proof closures that are operated by a special key included.Features Complete remote power solution for off-grid operation Weatherproof, uv resistant, outdoor enclosures Enclosures can be wall or pole mounted High performance valve regulated sealed lead acid batteries Advanced battery charge controller protects against Overcharge and over dischargeSpecifications Rated Power Generation - 2.5W Reserve Time @ Rated Power - 21hrs POE Output Voltage (DC) - No POE Out Secondary Volts Out (DC) - 12V 20A Battery Capacity (Amp Hrs) - 9Ah Battery Voltage (DC) - 12V Battery Type - Valve Regulated Sealed Lead Acid /Absorbent Glass Mat (AGM) Battery Life - 5 Years Controller Type - PWM Overcharge Protection - 14.4V Over-discharge protection - 11.0V Over-discharge recovery volts - 12.0V Controller Self Consumption - <0.5W Enclosure Type - Die Cast Aluminum Enclosure External Size - 11 x 8.5 x 3.5 in. Enclosure Internal Size - 10 x 7.75 x 3 in. Solar Panel Dims - 11 x 9 in. Operating Temperature - 30°C to +60°C Battery Weight - 5.5 lb. Wind Speed Rating - 110MPH 10W integrated Solar Panel - SKU: TYCN035