Vantrue Hardwire Kit for N4, E1, E1 Lite, E2, S2-2CH, S2-3CH, N2S, 11.5ft Type C USB 12V 24V to 5V with Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for Dash Cam

Compatible 12 – 24V Vehicles This hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 – 24V. 24/7 Parking Surveillance Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot. ACC mode with Switch Button With the switch button, you can easily set the hardwire kit to ACC mode, so it can turn on and off with the ignition and you don't have to worry about plugging in the charger, or turning the dashcam on, or any such stuff. Low voltage protection It has a smart low voltage protection system that will automatically shut off the power to your dash cam when the battery voltage drops to 11.6V or 23.2V, thus preventing it draining the battery. Mulitiple uses Type C USB plug compatible with all Type C dash cams, GPS navigator and radar detector etc, it always frees up the cigarette lighter for other devices. Please note: It doesn't work for other Vantrue Dash Cams, it only work for N4 and N2S, T3 dash cam.

Offer constant power while car is off. 24/7 Parking Surveillance. Low voltage protection protects against battery dying. TIPS: 1. If you found this is not compatible with your device or bought a wrong size, please contact Vantrue for a replacement. 2. If you have any questions when using the dashcam and the GPS mount, please also feel free to contact Vantrue. 3. If you don't know how to install the hardwire kit, please feel free to contact Vantrue. Or you can search the tutorial videos (including the review videos) on Youtube, and you will find a lot of help from there.