Ventamatic Power Attic Vent Thermostat with Firestat

Ventamatic's Power Attic Vent thermostat with Firestat features a fusible link which will shut off your electric attic or exhaust fan in unsafe operating conditions exceeding 183 deg. F, and is also used for the daily operation of your fan as a typical thermostat with a bi-metallic switch. This thermostat mounts to a rafter using wood screws and has a wiring diagram provided to complete installation. As a general rule for power attic fans, your normal temperature setting will range from 95 - 115 degrees F depending on average regional temperatures - a setting too low will run the fan continuously, and a setting too high will result in insufficient air turns for proper ventilation. WARNING: This product can expose you to chemicals including Chromium which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov -

FIRESTAT THERMOSTAT: The Ventamatic Firestat Thermostat controls power attic ventilators. The Firestat Temperature Range is 183°F at which point it cuts off the appliance. ADJUSTABLE THERMOSTAT: The Thermostat is adjustable by the use with a simple screw driver adjustment. It has adjustable bi-metallic switch. ENERGY EFFICIENT POWER ATTIC VENTILATOR: It provides energy-efficient operation of power attic ventilators and the temperature ranges from 50°F to 120°F. REPLACEMENT THERMOSTAT: This Ventamatic Replacement Thermostat controls power attic ventilators to promote the equalization of temperatures inside and outside your attic. Firestat safety feature shuts fan off at 183F Controls up to three units, not to exceed 10 amps. PROGRAMMABLE THERMOSTAT WARRANTY: This thermostat provides 10 years of warranty. It is of opening size 4.8 x 2.5 x 4.8 inches