Vestil FJB-100 Basement Floor Jack, 54" - 100" Height Range, Maximum Height Capacity (lbs.) 5600, Minimum Height Capacity (lbs.) 8438

This Vestil welded steel floor jack post (also called a basement floor jack) has a red oxide coating, a screw turning bar, and dual-lock pins, and it extends telescopically for temporarily leveling, bracing, and stabilizing floor beams and joists during construction or repairs. The floor jack post can be adjusted and set to any height within the given range, allowing it to be used in applications with different height requirements. Welded steel provides strength. A turning bar and screw bolt are used to adjust the floor jack post's height, and two dual-lock pins secure the floor jack post at the desired height. When opening the product, the pins can be found inside the tube secured in a cardboard casing. The floor jack post has a diameter of 3". Both end plates are pre-drilled and measure 3-1/2 x 6 inches. The floor jack post should be installed on a concrete floor or concrete footing, with either end up. Basement floor jacks, or jack posts, temporarily secure floor beams and joists in construction and industrial applications; they should not be used as permanent supports in new construction. Floor jack posts are typically made of steel for strength. They consist of an adjustable post and two end plates. The height of a floor jack post is adjusted using a screw and the post is held at the desired height with a series of pins. The bottom end plate must be installed on a concrete floor or concrete footing. Bolts must be used to secure each end plate to the structure the post is supporting, and a floor jack post's end plates may or may not have pre-drilled holes for these bolts. Vestil Manufacturing Corp. manufactures materials handling equipment, including jib and gantry cranes, loading dock equipment, and storage solutions. The company, founded in 1968, is headquartered in Angola, IN.

Vestil FJB-100 Basement Floor Jack, 54" - 100" Height Range, Maximum Height Capacity (lbs.) 5600, Minimum Height Capacity (lbs.) 8438