Wilson Electronics RF Signal Detector

The RF Signal Detector from Wilson Electronics is a quad-band detector that finds the available cellular signals in any location and displays signal attributes on the detector's LCD screen. This signal detector can be paired with a variety of Wilson antennas to map the local cellular frequency environment and find the direction of the cell tower that provides the strongest signal. This allows you to precisely point a directional antenna so a Wilson signal booster can maximize indoor cellular coverage. The Signal Detector's LCD screen displays the frequency of a detected signal, the range of pass bandwidth in megahertz (MHz) and the signal strength in decibels (dB). Easy-to-use button controls located just under the screen allow the user to move between frequency bands and channels. This device works with the 800 MHz (Cellular), 1900 MHz (PCS), 2100 MHz (AWS) and 700 MHz LTE (bands12 and 13) frequency bands. The RF Signal Detector is the perfect tool to help you optimize a Wilson signal booster installation or tune a directional antenna.

WLSN1028 Features: RF signal detector Signal frequency Spectrum bands configurable with a variety of antennas detects available signal indoors or outdoors Switches easily between frequency bands and channels Determine cellular signals including 3G and 4G Precisely position directional antennas for optimum performance maximize signal coverage indoors Bandwidth and strength works with 700, 800, 1900 and 2100 (AWS) MHz For any location find the strongest available signal map the local cellular frequency environment Connectors: N-Type Antenna impedance: 50 ohms Maximum detectable in-band: -38 Maximum recommended RF input (dBm): -38 Specifications: Power requirements: 110-240 V AC, 50-60 Hz Minimum detectable in-band signal with 10MHz BW (dBm): -105 Watt: 4.2W or 6V DC and 700mA Minimum detectable in-band signal with 1.5MHz BW (dBm): -110 Dimensions: Overall dimensions: 5.7" H x 4.2" W x 1.5" D Product weight: 1.24lbs