Wolfgang Concours Series WG-2000 Paintwork Polish Enhancer, 16 fl. oz.

Wolfgang Paintwork Polish Enhancer is your last chance to create a memorable gloss before wax application. Wolfgang's pre wax cleanser removes old waxes and sealants, light oxidation, and paint contamination to reveal deep color and gloss. Once you apply a wax or paint sealant, it will enhance the smooth, clean paint created by Wolfgang Paintwork Polish Enhancer. If you want the ultimate gloss, It'starts with Wolfgang Paintwork Polish Enhancer!

Use Wolfgang Paintwork Polish Enhancer before using Wolfgang Deep Gloss Paint Sealant 3.0 or Wolfgang Füzion Estate Wax for the first time to promote better bonding a a deeper shine. As needed, use Wolfgang Paintwork Polish Enhancer prior to wax or sealant application to rid the paint of wax build-up and contamination. Hand Application: Pour a nickel-size amount of Wolfgang Paintwork Polish Enhancer onto a clean microfiber applicator pad. This should be enough to cover a quarter of the hood or half of the fender. Spread the polish across the section in an overlapping motion. Allow a slight haze to form. Use a clean microfiber towel to buff the surface to a bright shine. Apply Wolfgang Paintwork Polish Enhancer by hand or machine. Apply Wolfgang Paintwork Polish Enhancer with a soft foam applicator. Machine Application: Use a white polishing pad on a dual action polisher, like the Porter Cable 7424XP. If you prefer a softer pad, use a gray finishing pad. Apply 3 beads of polish to either the pad or directly to the vehicle surface. With the polisher turned off, spread the product over the surface to avoid splatter. Set the maximum speed to 4.5 and work the polish over one panel at a time. When it begins to dry, stop polishing. Use a microfiber towel or bonnet to buff away the haze. Apply Wolfgang Deep Gloss Paint Sealant 3.0 or Wolfgang Füzion Estate Wax to protect the newly polished paint.