The Best Heating & Air Conditioning on Advance Auto Parts Shop 2025

1. Dayco Curved Radiator Hose Fits select: 1996-2000 CHEVROLET GMT-400, 1996-2000 CHEVROLET TAHOE

Dayco Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose Meets SAE J20R4, Class D-1 requirements for improved service hose Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges End 1 Inside Diameter : 1 1/4 In End 2 Inside Diameter : 1 1/4 In Material : EPDM Fits Select: 1996-2000 CHEVROLET GMT-400 1996-2000 CHEVROLET TAHOE 1996-1999 CHEVROLET SUBURBAN 1996-2000 GMC SIERRA 1999 GMC DENALI 1996-1999 GMC SUBURBAN 1996-1998,2000 GMC YUKON 1999-2000 CADILLAC ESCALADE and more - add your vehicle to our fit widget to check

2. Dayco Curved Radiator Hose

Dayco Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose Meets SAE J20R4, Class D-1 requirements for improved service hose Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges End 1 Inside Diameter : 1 5/16 In End 2 Inside Diameter : 1 5/16 In Material : EPDM

3. BWD Automotive A/C Selector Switch

BWD Automotive A/C Selector Switch

Designed to OE standards for ease of installation Copper alloy conductors ensure superior electrical conductivity with low resistive losses Robust design and high grade materials meet the stringent demands of today's service professional All of our switches are made to OE spec to ensure proper fit, form and function Our parts are 100% tested to verify both mechanical and electrical switching performance. Our parts are 100% tested to verify both mechanical and electrical switching performance. Decades of industry leading research and development focused on meeting the technician's needs Robust design and high grade materials meet the stringent demands of today's service professional

4. Dayco Curved Radiator Hose

Dayco Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose Meets SAE J20R4, Class D-1 requirements for improved service hose Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges Additional Features Color:Black Material:EPDM

5. Carquest Premium Suction & Liquid Line Hose Assembly w/o Orifice Tube Fits select: 2005-2007 FORD FIVE HUNDRED, 2005-2007 FORD FREESTYLE

High quality OE replacement part with all components needed to complete the job

All hoses are constructed with double wall barrier hose compatible with R134A or R12 Application specific design Contains gaskets, O-rings, or seals to properly replace the product Crimp fitting connection Fits Select: 2005-2007 FORD FIVE HUNDRED 2005-2007 FORD FREESTYLE 2005-2007 MERCURY MONTEGO and more - add your vehicle to our fit widget to check

6. BWD Automotive Oil Pressure Sender

BWD Automotive Oil Pressure Sender

Designed to OE standards for ease of installation In construction, we utilize high temperature, polyimide film diaphragms. These provide for exceptional cycle durability & resistance to rupture & oil leakage. Units are designed to handle rapid pressure pulsations, without component damage. All units are 100% tested using automated equipment that activates the switch, checks for leaks & stresses the part to ensure specification compliance, even under the most demanding operating conditions. Robust design and high grade materials meet the stringent demands of today's service professional BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

7. Intermotor Oil Pressure Sender

Intermotor Oil Pressure Sender

Each Oil Pressure Light Switch is a direct-fit OE replacement that ensures ease of installation High-quality materials withstand extreme conditions Undergoes extensive testing to ensure reliability As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process

8. Dayco Molded Radiator Hose

Dayco Molded Radiator Hose

Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose Meets SAE J20R4, Class D-1 requirements for improved service hose Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges

9. Dayco Curved Radiator Hose

Dayco Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose Meets SAE J20R4, Class D-1 requirements for improved service hose Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges End 1 Inside Diameter : 1 7/32 In End 2 Inside Diameter : 1 7/32 In Material : EPDM

10. Dayco Curved Radiator Hose

Dayco Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose Meets SAE J20R4, Class D-1 requirements for improved service hose Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges End 1 Inside Diameter : 1 7/16 In End 2 Inside Diameter : 1 1/2 In Material : EPDM