The Best Performance Fuel Pumps & Injectors 2025

1. MSD 2922 Electric Fuel Pump

Highly recommended to keep your fuel pump happy.; If you plan to run a return line with your Atomic EFI system, this kit provides a regulator, 15 ft of 3/8" line and the fittings to assemble.;

Regulator included Ready to assemble

2. Holley Performance 12-927 Electric Fuel Pump

Street/Strip EFI Applications Compatible with Gasoline only; The 12-927 universal in-line fuel pump is intended for Throttle Body EFI systems. It is designed to work in-line, not inside the tank, so installation is a snap. The 12-927 is rated for continuous duty service and have been tested up to 2,500 hours.;

Flows 43 GPH at 15 psi Draws 3.5 amps at 15 psi Will feed up to 400 horsepower throttle body efi unit (not intended for multipoint efi) OE proven design Lightweight and compact 3/8" barbed fittings included Rubber isolator, mounting clamps and electrical hardware included Not designed for use on aircraft of any type.

3. MSD 2225 Electric Fuel Pump

Multiport EFI systems require a stable fuel supply to maintain best performance throughout the engine's rpm range.; This high pressure and high flow Fuel Pump features a roller vane pump mechanism which is extremely resistant to clogging and jamming. The pump mounts in-line (out of the fuel tank) with two supplied cushioned clamps for a quick and sturdy installation. The nipple inlet and outlet are 3/8 in.. The wire terminals feature brass studs for secure connections. Made in the USA, the pump is ideal for use as a booster for NOS applications, or as a stand alone pump for multi-port EFI systems on engines up to approximately 525 HP. Capable of 48 GPH at 43 PSI.;

48 GPH at 43 psi 3/8" hose nipple inlet 3/8" hose nipple outlet

4. Holley Performance 12-801-1 Electric Fuel Pump

Street/Strip Carbureted Applications Compatible with Gasoline Only; The world famous Red®, Blue® and Black® fuel pumps are the most recognized performance pumps of all times. They have been powering racing legends and street enthusiasts alike since the early 70's. Their time proven rotor/vane design is known to get the job done in an affordable package.;

Tumble polished billet look Lower housing casting designed for enhanced fuel flow Maximum pressure is 7 psi Motor draws 2 amps current Relay kit P/N 12-753 & 7 1/2 amp fuse recommended Constant fuel flow with no pulsation Improved design for street/strip applications Not designed to be used on aircraft of any type. Distinctive “Red†logo Flows 97 GPH (free flow) Flows 71 GPH at 4 psi regulator is not required Has externally accessible pressure relief valve (max 7 psi) Rotor/vane pump design is more tolerant of contaminated fuels Weighs only 2.88 lbs Not designed or recommended for use with fuel injection systems Includes mounting bracket Repair kits are readily available Can be serviced from the pump end Not compatible with alcohol or methanol fuels

5. Holley Performance 12-920 Electric Fuel Pump

Street/Strip EFI Applications Compatible with Gasoline only; The 12-920 universal in-line fuel pump is intended for Throttle Body EFI, Multipoint EFI and Forced Induction Multipoint EFI systems. It is designed to work in-line, not inside the tank, so installation is a snap. The 12-920 is rated for continuous duty service and have been tested up to 2,500 hours.;

Draws 5 amps at 15 psi Will feed up to 800 horsepower throttle body EFI units Will feed up to 700 horsepower multipoint units Will feed up to 600 horsepower forced induction multipoint units OE proven design Lightweight and compact Rubber isolator, mounting clamps and electrical hardware included 3/8" barbed fittings included Not designed for use on aircraft of any type.

6. Holley Performance 12-1800 Electric Fuel Pump

Carb or EFI Applications Supports up to 1800 EFI or 2100 Carb HP Compatible with Pump Gas*, Race Gas, Diesel or E85; Need to feed some serious horsepower? Have a NOS or forced induction powerplant that also sees street duty? Holley's Dominator™ in-line fuel pumps are the answer! The patent pending twin pump design allows you to use one pump for cruising and both pumps when you activate the NOS switch or start building boost! By staging the second pump, you eliminate the unnecessary recirculating and heating of extra fuel which can lead to poor performance and hot fuel issues. For hard core race vehicles, both pumps can be wired for full time duty to get maximum performance and are proven with 18.5 volt compatibility at pressures up to 80 psi. At only 5.1 lbs, they weigh half a pound less than competitive 1000+ horsepower pumps yet have twice the features!;

Billet aluminum construction for durability and good looks 10 AN O-ring inlet/outlet for high flow and superior sealing Excellent for use with carbureted or EFI applications Fully submersible in-tank for custom applications, space savings and less plumbing Compatible with 12v to 18.5v systems for street or race use Compact (7.66†Long x 5†Wide x 2.5†Tall) for easy installation on frame rails or other tight areas Twin pump design allows the use of both pumps simultaneously or independently - second pump can be activated on demand for power adders such as nitrous or boost Patent pending dual pump technology Proven durability beyond 3,000 hours in gasoline or diesel fuels Weighs only 5.1 lbs. Current draw at 43 PSI and 13.5 VDC is 17.2 Amps Not designed for use on aircraft of any type.

7. ACDelco EP247 Electric Fuel Pump

Replacing the Electric Fuel Pump on your vehicle? The ACDelco EP247 is a direct replacement with the fit of an Original Equipment part.

ACDelco Gold (Professional) Electric Fuel Pumps are a high quality alternative to Original Equipment (OE) parts. Electric fuel pumps are used on engines with fuel injections to pump fuel from the gas tank to the injectors. The pump must deliver the fuel under high pressure so that injectors can spray fuel into the engine. Fuel pressure must be within specifications for the engine to run correctly. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

8. MSD 2351 Electric Fuel Pump

The controller allows you to increase voltage based on boost.; The updated Fuel Pump Booster is an easy way to maintain the proper fuel pressure on your car after adding a power adder such as a turbo or supercharger. The Booster ensures that the engine receives the fuel it needs to make up for the increase in air being pumped into the intake manifold. It will increase the voltage to the factory fuel pump in proportion to manifold boost pressure in order to maintain the proper fuel delivery. The amount of increase is adjustable from a range of an additional 1.5 -22 volts and up to 30 psi which can all be set and adjusted from your PC with MSD's easy to use Windows based software. The MSD Booster will wire to the factory fuel pump relay or with a secondary booster pump.;

The Booster allows you to make your boost adjustments through a PC for improved control and accuracy. Voltage output is adjustable up to 22 volts at 15 psi of boost For use with stock electric fuel pumps or secondary booster pumps NOTE: The Fuel Pump Booster cannot be used on fuel systems without a return line (pulse-modulated pumps).

9. MSD 2921 Electric Fuel Pump

High horsepower fuel kit for use with Atomic TBI; The Fuel Upgrade is a replacement fuel pump for vehicles making between 525-650hp. Parts included: Fuel Pump, Pre-Filter, Post-Filter, 15 ft. 3/8" Fuel Line, Mounting Hardware;

Supports 620 horsepower Direct replacement for the Standard Fuel Kit

10. Holley Performance 12-890 Electric Fuel Pump

Carb or EFI Applications Supports up to 900 EFI or 1050 Carb HP Compatible with Pump Gas*, Race gas, Diesel or E85; Holley's HP™ In-Line Billet Fuel Pumps are designed to be the perfect companion to your carbureted or fuel injected race car, off-road truck or any engine needing fuel! The HP™ fuel pumps feature OEM gerotor technology which yields lightweight, quiet operation and 100,000+ mile durability in a cost effective, attractive package. HP™ fuel pumps are Race gas, E-85 and diesel compatible and can be used in racing applications with 18.5 volt charging systems up to 80 psi.;

Billet aluminum construction for durability & good looks -8 an o-ring inlet/outlet for high flow and superior sealing Excellent for use with carbureted or EFI applications Fully submersible in-tank for custom applications, space savings and less plumbing Compatible with 12v to 18.5v systems for street or race use Compact (7.5†long x 3†wide x 2.75†tall) for easy installation on frame rails or other tight areas Proven durability beyond 3,000 hours in gasoline or diesel fuels Weighs only 3.1 lbs. Current draw at 43 psi and 13.5 vdc is 8.6 amps Not designed for use on aircraft of any type.