10" LED Grille for Select KICKER Subwoofers - Charcoal

Audio Technica AT4033A Condenser Microphone w/ Shockmount

Dust Cover

and Case Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients Precision-machined

nickel-plated brass

acoustic element baffle provides enhanced element stability and optimal sensitivityThe 2-micron-thick

vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use Floating-construction capsule assembly provides isolation from noise and vibration Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflectionsState-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards Custom shock mount provides superior isolation Element: Fixed-charge back plate

permanently polarized condenser Polar Pattern: Cardioid Frequency Response: 30-20

000 HzLow Frequency Roll-Off 80 Hz

12 dB/octave Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa Impedance: 100 ohms Maximum Input Sound Level: 145 dB SPL

1 kHz at 1% T.H.D.; 155 dB SPL

with 10 dB pad (nominal) Noise: 17 dB SPLDynamic Range (typical): 128 dB

1 kHz at Max SPL Signal-To-Noise Ratio 77 dB

1 kHz at 1 Pa Phantom Power Requirements: 48V DC

3.2 mA typical Switches: Flat

roll-off; 10 dB pad (nominal) Weight: 13.4 oz (380 g) Dimensions: 6.69" (170.0 mm) long

2.10" (53.4 mm) maximum body diameter Output Connector: Integral 3-pin XLRM-type Accessories Furnished: AT8449a shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case