Radwag PUE 7 Measuring Indicator

Terminal PUE 7 series is intended to designing industrial scales. It is available in plastic or stainless steel housing for installing as panel version. PUE 7 features 5.7” colourful graphic touch screen display and membrane keypad. Two proximity sensors with programmable functionality offer hands-free operationPUE 7 enables plugging a set of peripherals, including: barcode scanners, receipt and label printers, transponder card readers and typical PC equipment (keybord, mouse etc.). The terminal supports 1 weighing platform in standard version.Software versions: Standard (labeling, parts counting, percent setup, formula making, filling, animal weighing and denisty modes) single stand CPG (control of prepacked goods) CPG networkSpecification Housing - Plastic IP rating - IP 54 Proximity sensors - 2 Power supply - 120÷230VAC; 10÷15VDC Display - 5,7" with touch panel Keypad - 8 keys Operation Temperature - -10°C ÷ 40°C OIML class - III Maximum number of verification intervals - 6000 Maximum input signal increase - 19,5 mV Maximum voltage per verification interval - 3,25 µV Minimum voltage per verification interval - 0,5 µV Minimum tensometer impedance - 80 Ω Maximum tensometer impedance - 1200 Ω Tensometer bridge excitation voltage - 5 V Processor - ARM 200 MHz Memory - RAM 64 MB, Flash 1 GB Operation System - Windows CE 6.0 Number of platforms - 2 Interfaces - 2×RS 232, 2×USB, Ethernet, 4in ⁄ 4out Parameters In⁄Out - In 1 ÷ Out 4 Type of In⁄Out - Reed relay type NO Wire cross-section - 0,14 ÷ 0,5 mm2 Maximum switching current - 200 mA DC Maximum forward voltage - 50 V DC - SKU: RDWG084

Terminal PUE 7 series is intended to designing industrial scales. It is available in plastic or stainless steel housing for installing as panel version. PUE 7 features 5.7” colourful graphic touch screen display and membrane keypad. Two proximity sensors with programmable functionality offer hands-free operationPUE 7 enables plugging a set of peripherals, including: barcode scanners, receipt and label printers, transponder card readers and typical PC equipment (keybord, mouse etc.). The terminal supports 1 weighing platform in standard version.Software versions: Standard (labeling, parts counting, percent setup, formula making, filling, animal weighing and denisty modes) single stand CPG (control of prepacked goods) CPG networkSpecification Housing - Plastic IP rating - IP 54 Proximity sensors - 2 Power supply - 120÷230VAC; 10÷15VDC Display - 5,7" with touch panel Keypad - 8 keys Operation Temperature - -10°C ÷ 40°C OIML class - III Maximum number of verification intervals - 6000 Maximum input signal increase - 19,5 mV Maximum voltage per verification interval - 3,25 µV Minimum voltage per verification interval - 0,5 µV Minimum tensometer impedance - 80 -- Maximum tensometer impedance - 1200 -- Tensometer bridge excitation voltage - 5 V Processor - ARM 200 MHz Memory - RAM 64 MB, Flash 1 GB Operation System - Windows CE 6.0 Number of platforms - 2 Interfaces - 2×RS 232, 2×USB, Ethernet, 4in ⁄ 4out Parameters In⁄Out -- SKU: RDWG084