ANT Enterprises Insulation Reflective Foam Radiant Barrier for Easy Installation 4'x10'

THESE ARE FACTORY SECONDS FACTORY SECONDS MY HAVE BUBBLE OR BLEMISHES THIS INSULATION IS JUST AS EFFECTIVE BUT HAD VISUAL DEFECTS/BLEMISHES One layer closed-cell foam bonded between two layers of highly reflective metalized aluminum polyester film. Industrialized strength, lightweight yet durable insulation designed to hold staples without tearing. Does not compress, collapse or disintegrate. Reflects 97% of radiant heat, emits less than 3% of heat, Class 1 / Class A fire rated radiant barrier that has passed the ASTM E84 test & ASTM E2599 Non-toxic, non-carcinogenic, fiber-free, safe to handle and does not require protective clothing or respirators to install. Easy to install and maintenance free, cuts easily with utility knife or scissors and installs easier than fiberglass. Simply staple, nail, glue or use a spray adhesive to hold in place! No mess, and no itchy fibers! Not affected by moisture or humidity. Inhibits condensation and does not promote the growth of fungi, mold or mildew. Does not promote nesting of insects or rodents. Non-flammable, flame retardant Saves energy by reducing the stress on heating and cooling systems, keeping your home warmer in the winter, and cooler in the summer. It can reduce utility bills substantially all year round. As well as provides benefits of soundproofing when used in walls, ceilings and floors. Can also increase your overall property value depending on use. Dimensions: (48 Inches wide by 10 feet long ), 7MM (1/4In) thick, Made in the USA Product: Foam Core laminated between two layers of highly reflective radiant barrier foil. Contact Temperature Range: -60°F To 180°F (-51°C To 82°C) Water Vapor Transmission: .02 Perms**** Puncture Resistance: 60 Lbs. Per In.*** Pliability: No Cracking Linear Shrinkage: None Mold And Mildew: No Growth Flame Spread: 0 Astm E84-08 Smoke Development: 40 Astm E84-08 Fire Rating: Class A / Class 1 Reflectivity: 95% Motor Vehicle Safety Standard 302: Zero Surface Burn Rate Emittance: 0.04****

ANT Enterprises Insulation Reflective Foam Radiant Barrier for Easy Installation 4'x10' Reflective Foam Heat Shield Thermal Insulation Radiant Barrier 4x10ft One layer of closedcell foam bonded between two layers of highly reflective metalized aluminum polyester film Lightweight yet durable insulation designed to hold staples without tearing Reflects 97% of radiant heat and emits less than 3% of heat Class 1 / Class A fire rated radiant barrier that has passed ASTM E84 and ASTM E2599 tests Nontoxic, noncarcinogenic, fiberfree, safe to handle without protective clothing or respirators Easy to install and maintenancefree, cuts easily with a utility knife or scissors Can be stapled, nailed, glued, or held in place with spray adhesive Not affected by moisture or humidity, inhibits condensation, and does not promote mold or mildew growth Nonflammable and flame retardant Saves energy by reducing stress on heating and cooling systems, keeping homes warmer in winter and cooler in summer Can substantially reduce utility bills yearround Provides soundproofing benefits when used in walls, ceilings, and floors Dimensions: 48 inches wide by 10 feet long, 7MM (1/4 inch) thick Contact temperature range: 60°F to 180°F (51°C to 82°C) Water vapor transmission: 0.02 perms Puncture resistance: 60 lbs per inch No cracking or linear shrinkage No growth of mold and mildew Flame spread rating: 0 (ASTM E8408) Smoke development rating: 40 (ASTM E8408) Reflectivity: 95% Zero surface burn rate per Motor Vehicle Safety Standard 302 Emittance: 0.04