Audio Technica 1-Person PC Podcast Podcasting Kit w/ 2035 Mic+Headphones+Boom

Package: Audio Technica AT2035PK Studio Mic Recording Package-Microphone, Headphones and Boom

How to Setup your Podcast - Microphones, Interfaces, and Equipment (Rockville University Ep 1.): Description of AT2035PK: The AT2035PK vocal microphone pack is designed for streamers, podcasters, andother content creators who need a versatile, easy-to-install, easy-to-adjustboom microphone setup. The pack includes an AT2035 cardioid condensermicrophone, a pair of ATH-M20x professional monitor headphones and a studio boomarm threaded with a XLR cable. The adjustable studio boom arm clamps securely to desks, tables and other flatsurfaces up to 55 mm (2.2") thick. The boom is equipped with a standard 5/8"-27thread for easy attachment of the included microphone shock mount, and the XLRcable is threaded internally for a clean appearance and unhindered operation.Offering full 360° rotation and adjustable, spring-stabilized joints, the boomarm repositions quickly for optimal mic placement. Features: AT2035 Cardioid Condenser Microphone Large diaphragm for smooth, natural sound and low noise High SPL handling and wide dynamic range provide unmatched versatility Custom shock mount provides superior isolation Switchable 80 Hz high-pass filter and 10 dB pad Cardioid polar pattern reduces pickup of sounds from the sides and rear,improving isolation of desired sound source ATH-M20x Professional Monitor Headphones Advanced build quality and engineering 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils Tuned for enhanced low-frequency performance Circumaural design contours around the ears for excellent sound isolation inloud environments Convenient single-side cable exit Adjustable Studio Boom Arm Full 360° rotation Adjustable, spring-stabilized joints with thumbscrews for easy repositioning ofthe microphone Clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2")thick Included XLR cable (XLRF to XLRM) extends 3 m (10') from the base of the boomarm Internal cable management for clean desk appearance Standard 5/8"-27 thread for easy attachment of the included shock mount Specifications: Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Cardioid Frequency Response: 20-20,000 Hz Low Frequency Roll-Off: 80 Hz, 12 dB/octave Open Circuit Sensitivity:-33 dB (22.4 mV) re 1V at 1 Pa Impedance: 120 ohms Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10dB pad (nominal) Noise: 12 dB SPL Dynamic Range (Typical):136 dB, 1 kHz at Max SPL Signal-To-Noise Ratio: 82 dB, 1 kHz at 1 Pa Phantom Power Requirements: 11-52V DC, 3.8 mA typical Switches: Flat, roll-off; 10 dB pad (nominal) Weight: 403 g (14.2 oz) Dimensions: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter Output Connector: Integral 3-pin XLRM-type Accessories Furnished: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27to 3/8"-16 threaded adapter; soft protective pouch Audio-Technica Case Style: R2 ATH-M20x Headphones Specifications: Type: Closed-back dynamic Driver Diameter: 40 mm Magnet: Neodymium Voice Coil: Copper-clad aluminum wire Frequency Response: 15 – 20,000 Hz Maximum Input Power: 700 mW at 1 kHz Sensitivity: 96 dB Impedance: 47 ohms Weight: 190 g (6.7 oz), without cable and con