Datingday 18L 110V Stainless Steel Steam Autoclave Sterilizer Dental Pressure Sterilization

Features: Self-lifting seal. Heated by immersed electro-thermal tube, It featured to quick rise temperature and low power consumption (saving about 50% of energy as compares with electric stove). Spring-type safety valve over-pressure immediate self-unloading to ensure safety. Double-scale two-type reading pressure gauge, reading is more convenient and quick. Iron flange reinforcement thickening pot body coal and electricity dual purpose. This Autoclave can also use liquefied petroleum gas and coal stove as the heating energy. It uses saturated steam to rapidly and efficiently sterilize articles, can be used in hospitals, public health centers, health stations, clinics in factories and mines, scientific research institutes, etc, to sterilize medical equipment surgical dressings, glass utensiles, solutions, substrata, etc.. It can also be used as cooker in plasteau areas and be used to make high quality drinking water in industrial and mining enterprises. Specifications: Product Name: Medical Steam Sterilizer Model: XFS-280A Sterilizing Volume: 18L Whole Size: About 17.7 x 13.8 x 11.2in Power: 110V Output Power: 2.0KW Overpressure Auto-discharging:0.145-0.17Mpa Range Of Measurement: Max. 121°C-129°C Plug: US Plug Material: Stainless Steel Color: Silver Dimensions: 320x280x260mm Package Included: 1x Steam Sterilizer 1x Power Cord 1x English usage manual. Operation: Step 1.Place the sterilizer on a flat surface. Step 2.Open the lid, take out the inner tank of sterilizer (you can see the heating electric tube),add water to the heating tube above 3.5L, you must add enough water in time to avoid burning the electric tube due to lacking of water. Step 3.Put those items need to sterilize into the sterilization room, you should keep gaps between the items. Do not block steam holes of the safety valve, air releasing valve, and finally cover the lid, tighten the screws. Step 4. After the normal operation of the equipment, when the measured temperature reaches 105 °C, open the air releasing valve to discharge cold air inside the sterilizer. When the air releasing valve start going out a little hot steam, close the air releasing valve. Step 5. When the steam pressure reaches 0.142-0.17MPa , the safety valve will start pressure relief work, in order to maintain a certain pressure. Step 6. After sterilization, unplug the power cord. 3 minutes later, open the air releasing valve, when the pressure gauges to zero, open the lid to discharge the remaining air. Safety Measure and Maintenance 1. This sterilizer is steam pressure vessel so do not impact in using and forbid overpressure. If the pressure pointer of pressure gauge reaches the 0.17MPa and the safety valve does not exhaust, it should stop using at once and check up the safety valve. 2. The pointer should be at zero position before usage the pressure gauge, otherwise the gauge has been failure and it should repair or replace the gauge. The pressure gauge should be regulated 1~2 times per year, ensuring sensitiveness and correctness. 3.Gasket is easy to wear. If it does not wok well, see it whether become aging and hard, then replace it in time.

★100% Brand New！Fast Delivery! ★Quality assurance! ★Durable in use!