GameXcel Vinyl Decal Protective Cover Wrap Sticker for Xbox Series X Console and Wireless Controller(Assassin's Creed Valhalla)

Installation Instruction: 1) Clean the unit's surface as thoroughly as possible.Use rubbing alcohol on a lint-free cloth to remove any grease or other contaminates. Most issues of non-sticking are due to some type of oil or grease. 2) Peel one piece of Xbox Series X Decals from the paper liner. NOT to let the adhesive side touch anything. 3) Determine the placement, apply the Xbox Series X console and controller skin to the surface using your fingers or the side of your thumb, starting from one corner and working your way across the surface. 4) If a piece is not going on straight, you can gently lift it back up. Do not stretch it from its original size. 5) If installed slowly and carefully, there should be NO air bubbles left under the sticker. Any air that may become trapped during installation will go away in time. 6) During the cold weather or for a better result, apply hot air to the decal surface by using a hair dryer or hot air gun to activate chemical agent while putting the sticker. Especially heat up the edge surface. Allow at least 3 hours for cool down before touching the decal sticker skin.

【MATERIAL 】eco-friendly vinyl skin, ultra-thin, ultra-durable, no peeling, the pattern does not fade 【 MULTI-FUNCTION 】 high definition digital printing, stylish adhesive skins decoration, when you want to change another decal, just tear off the it without residue 【 PROTECTION】protect your Xbox Series X console and controller from greasy dirt, scrapes, dust, fingerprints. few years later, your console is the same as the new one 【INSTALLATION】the installation is very simple and can be done without professional training. don't worry it 【Package Content 】1 x set console skin 2 x controller skins (Assassin's Creed Valhalla)