Kasco Marine Model 2400 1/2 HP Water Outdoor Fountain Aerator

Our 2400 Water Fountain Aerator is an environmentally friendly oil-filled motor with a hard-face internal mechanical seal and external lip seal for protection against leaks. Highly efficient - lower power consumption than competitive equipment makes it affordable in the long term as well as at the time of purchase - the F2400/VFX only draws 5.6 operating amps. Superior dependability in salt-water and other corrosive environments. Requires little maintenance - we recommend cleaning the stainless steel motor housing once or twice per year. Safety- Kasco fountains are ETL approved to UL and CSA standards as an entire packageMotor- Kasco fountains are 1750 RPM which allows less wear and heat and gives longer seal and bearing lifePackage- Kasco fountains are a complete package including float, control, power cord, mooring ropes, motor and nozzlesEnergy Efficiency- Kasco fountains feature low amp draw with high flow rates per kW of per usedRepair Costs- Kasco fountain repairs are much lower cost and are done very quickly either through their repair facility in Wisconsin or at many locations scattered all over the United StatesFlow Rates- Kasco flow rates are proven to be much higher through independent flow rate tests, which gives better aeration for improved water quality, holds up to wind better, and clogs lessMost affordable aerating fountain of its type Lightweight and easy to install Large, clog-resistant decorative pattern - 15' diameter x 5' high Includes the C-25, 120V Unit Control with timer and GFCI protection No electrician needed if there is an existing 120V, 15 amp receptacle Successful shallow water operation - operates in as little as 15" of water Longer-life top and bottom ball bearings Flood oil lubricated for excellent heat dissipation All external metal: motor, float, and hardware components are made of stainless steel composition and protected by a sacrificial zinc anode Standard unit includes a 100' power cord and two 50' mooring lin (KM003-2400)

Decorative fountain aerator Oil-filled motor with a hard-face internal mechanical seal Available in your choice of chord lengths External lip seal for protection against leaks Corrosion-resistant and low-maintenance Safe for fresh and saltwater applications Our 2400 Water Fountain Aerator is an environmentally friendly oil-filled motor with a hard-face internal mechanical seal and external lip seal for protection against leaks. Highly efficient - lower power consumption than competitive equipment makes it affordable in the long term as well as at the time of purchase - the F2400/VFX only draws 5.6 operating amps. Superior dependability in salt-water and other corrosive environments. Requires little maintenance - we recommend cleaning the stainless steel motor housing once or twice per year. Safety- Kasco fountains are ETL approved to UL and CSA standards as an entire package Motor- Kasco fountains are 1750 RPM which allows less wear and heat and gives longer seal and bearing life Package- Kasco fountains are a complete package including float, control, power cord, mooring ropes, motor and nozzles Energy Efficiency- Kasco fountains feature low amp draw with high flow rates per kW of per used Repair Costs- Kasco fountain repairs are much lower cost and are done very quickly either through their repair facility in Wisconsin or at many locations scattered all over the United States Flow Rates- Kasco flow rates are proven to be much higher through independent flow rate tests, which gives better aeration for improved water quality, holds up to wind better, and clogs less Most affordable aerating fountain of its type Lightweight and easy to install Large, clog-resistant decorative pattern - 15' diameter x 5' high Includes the C-25, 120V Unit Control with timer and GFCI protection No electrician needed if there is an existing 120V, 15 amp receptacle Successful shallow water operation - operates in as little as 15" of water Longer-life top and bottom ball bearings Flood oil lubricated for excellent heat dissipation All external metal: motor, float, and hardware components are made of stainless steel composition and protected by a sacrificial zinc anode Standard unit includes a 100' power cord and two 50' mooring lines 350T low voltage lighting and transformer package available as an option