Krylon Colormaster Enamel Spray Paint - Satin Ballet Slipper - 12 Oz

I've been doing DIY projects for 50 years and spray painting was always my last resort for painting furniture, toys, etc. The finish was never smooth and took so long to dry that bugs, dust and debris was always embedded by the time it was dry enough to handle. Not anymore!! Follow the directions for prepping the surface and for ambient temperature, humidity and wind speed, and watch a smooth, professional finish develop before your eyes. My husband works for a major manufacturer of automotive finishing products and even he was amazed. I've used more than a dozen cans of this paint in various finishes [glossy, metallic, satin, etc] over the past year, painting everything from brass cranes to wooden tables and have only had one failure. Obviously the nozzle was bad and the paint spit in large globs and droplets all over me, the floor and the frame I was painting. Recommend you do a test spray over lawn or covered surface before aiming at the object to be painted. [The store gave me a full refund for the messy can I returned.]. Other than that one negative event, everything I've painted has had a smooth, factory finish at the end, with the gloss level accurate and durability great. In addition, it comes in a wide variety of colors, so I'm able to match even unusual shades of colors used in a room. Highly recommended!!

I have used Krylon Paint for YEARS. This can of spray paint is garbage dirty spray paint. Clean metal tray applied paint as if dust specs mixed in the paint. Next day lightly sanded the specs off. Wiped of the dust and smooth finish again. Re-painted the tray and same exact problem specs in the paint also this is being done indoors basement so no wind or dust in the air. Now I get a sheet of tin foil off a roll right out of the box and the same exact thing. YOU HAVE CONTAMINATED PAINT

Using this paint to restore Vintage tools, The paint coats evenly and dries well. After reading the reviews on this paint, i have to say i can't see any flaws with this product. I think the other people who have used this product and left negative remarks don't seem to understand that before you apply this product to something. You have to clean what you will be painting with Denatured Alcohol or Mineral Spirits first. The paint wont stick if what you are painting is covered in crud.

Bought a can for a simple craft project. Repainting some white picture frames. Frames were brand new, clean, previously painted gloss white, not bare plastic. Sanded to a dull finish. Paint would not stick. Pulled away and orange pealed awful. Tried the paint on some parents rough plastic. It wouldn't stick. Tried on a wood broom handle . Was so thin it would have taken 4-5 coats to even start to cover. Tried on metal. Pulled away and wouldn't cover. Could not get smooth coverage on any surface. Awful awful paint. Won't be buying any more of this garbage.

This is the only paint I will use. Use it mostly on automotive parts. Works well on interior and even sprayed my Jeep 4 years ago and still no rust. Use it for anything else around the shop and house. Just need to keep tip clean and shake well like any other spray paint. Great product.