Krylon Interior/Exterior Industrial Maintenance Paints, 12oz Aerosol Can, Leather Brown

This paint is great, I painted my door hardware and it came out with a beautiful smooth texture and deep, opaque color. Even though I sprayed too much in one area, after shaking off the drip, the paint evened itself out! And it dried to the touch in 10 minutes, my hardware was ready to put back on the door in no time! Love!

After using Rustoleum and experiencing bad results, I decided to give Krylon a try. BEST DECISION EVER. The nozzle sprays evenly and just the right amount so I never experienced any run or drip, and I didn't have to worry if I was spraying too close. Sprayed 1 tacky coat, then 2 wet coats 10 minutes apart, and let it dry for two days. Then sanded with 600 and I never had any issues with the next layers, in fact the newer coats ended up even nicer. After I sprayed my color, although it was suggested not to, I applied Clear Gloss on top of it the same way, about 10-12 coats (3 per day), and let it dry for a week after the final spray. Then I sanded with 1000, 1500, 2000 and 2500 grit and then hand buffed and polished. I never thought I could have this finish quality without a spray booth or spray guns. Patience is the key. Also read weather and humidity conditions before you spray, it seriously can affect your project.

The first time I used it, it was fine. However, when I had to use it for another project, the spray of the spray paint didn’t work and yes, there was still a lot of product inside. Also, this happened to me not only once but twice with the same product in different colors. If I knew that this paint was a one time use only, I would have not spend my money for nothing!

I purchased this to recolor some light switch plates. Says it works on plastic. I spend time to prep, making sure the plates were clean with no oil residue. I planned on several light sprays to keep it from running. Nope, no matter what I did it ran. The paint is like water, and doesn’t stick to anything. I tried some other material to see if I was doing it wrong, but nope.... all ran.

I am a hobbyist and make a lot of various models so I use a lot of different paints. This paint is VERY thin. Mind you it's not runny, it just sprays incredibly thin. The problem with Colormaster paints is that it easily "lifts" once it goes down. You cannot top coat it or it will "wrinkle" and you cannot apply a clear coat...ever. Wrinkle, wrinkle, wrinkle. Once you spray it you are done. This is TERRIBLE if you are doing multiple layers of paint and different colors on one project. I cannot recommend this paint, do not use it or you will regret it. It will totally ruin your project.