PreSonus Studio Monitors ERIS PRO 6 - Black

Audio engineers, producers, and musicians looking for a professional studio monitor with a wide stereo image and precision phase alignment will be impressed with the single PreSonus Eris Pro 6, an active 2-way studio monitor which employs a single point-source coaxial design for clear and accurate sound reproduction. This design provides superior phase alignment between components and delivers a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns. The Eris Pro 6 has unique advantages for Dolby Atmos immersive rooms as well as stereo mix environments. Two Class-AB amplifiers deliver 75W to the 6.5" woven composite woofer and 65W to the 1.25" silk dome tweeter, which offers a snappy, accurate transient response. The monitor offers a frequency response from 20 kHz down to 35 Hz for a full-range sound without a subwoofer and plenty of volume (103 dB SPL). The rear panel provides acoustic tuning controls, including a three-position Acoustic Space switch that helps compensate for the boundary bass boost that can occur when a monitor is placed in a corner or near a wall. High and Mid controls help to further mitigate room anomalies, while a low cutoff filter makes it easy to integrate a subwoofer into your monitor setup. Lastly, provisions for wall and ceiling mounts make it easy to integrate Eris Pro 6 monitors into any stereo or multi-channel system. Key Features at a Glance 6.5" woven composite low-frequency driver 1.25" ultralow mass, silk-dome, high-frequency driver 100 x 60° EBM waveguide provides a sweet spot 140W, Class AB dual amplification 35 Hz to 20 kHz frequency response 103 dB Peak SPL (at 1 m) Acoustic Tuning Controls: Acoustic Space (Flat, -2 dB, -4 dB) High Frequency (±6 dB, center 10 kHz, continuously variable) Mid Frequency (±6 dB, center 1 kHz, continuously variable) Low Cut (Flat, 80, 100 Hz at -12 dB/octave) Inputs: XLR and 1/4-inch TRS balanced rear-panel inputs RCA unbalanced rear-panel inputs Protection: RF interference Output-current limiting Over-temperature Turn-on/off transient Subsonic filter Power Saver mode (engages after 40 minutes) Wall and ceiling mountable Box Contains Presonus ERIS Pro 6 1 x Power Cord

The Eris Pro 6’s coaxial design provides a single acoustic point source that creates a natural listening experience, revealing the subtlest nuances in your recordings. Combined with a punchy low-end that defies its compact size, the Eris Pro 6 provides a superior listening experience for both home studios and professional mix rooms. A 1.25-inch, ultra-low mass, silk-dome tweeter ensures snappy, accurate transient reproduction, while an 6.5-inch, woven-composite woofer offers tight, clear bass, with plenty of punch and no flab. The symmetric coaxial design provides a consistent acoustic center and superior phase alignment between components to deliver a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns – making the Eris Pro 6 ideally suited for immersive Dolby Atmos rooms and stereo mix environments alike. Acoustic tuning controls and a three-way Acoustic Space control lets you accurately configure the Eris Pro 6 for your room. Flexible input options enable connection of almost any line-level source, from mixers to audio interfaces and more. Provisions for wall and ceiling mounts make it easy to integrate Eris Pro 6 monitors into any stereo or multi-channel system.