Simpli Home - Warm Shaker SOLID WOOD 72 inch Wide Transitional TV Media Stand in Light Golden Brown For TVs up to 80 inches - Light Golden Brown

This is a really great piece. While it had a LOT of parts, it went together fairly easily. I just took my time and followed the directions. I appreciate the pics AND words!

This stand is holding up great. Have had it for a few years and i just love it. I got the tobacco brown and it's such a great color. I love the sturdy pine construction, it's so much better than the mdf stand i used to have. I am planning to get more pieces from this company.

I just received the Antique White color of this TV stand yesterday and assembled it last night. Overall, it's decent quality, but there were definitely a couple hiccups during assembly. The bottom piece was cracked and required gluing to make it less noticeable, and when adding the top piece, it would not fit on one of the dividers and we had to saw the piece down to make it fit (at least it was not visible after it was all said and done). And lastly, the photo makes the Antique White color look more off-white/distressed, but in person, it really has a more almond/yellow hue to it which is kind of disappointing. Overall not bad, but could be better with a couple small things.

Overall happy with the product. We did assembly ourselves and it was very time consuming. Several issues during assembly: (a) Manufacturer should provide a gauge or at least specify how much of the Cam Lock Pins (part 2) should be exposed after placing them in the designated holes. If the pins are inserted too far or not enough the Cam Locks will not engage and thus will not lock. (b) Very few of the pilot holes needed for assembly were more than a slight dimple. These pilot holes need to be deep enough to get the screws started in the correct position -- we had to use an awl to make them deep enough. (c) Additionally, the pilot holes on the bottom shelf that are needed to attach the dividers (CL, CR, DL, and DR) were on the side of the wood OPPOSITE that needed for one of the dividers. In this case we had to create all new pilot holes.

Quality control on this was marginal at best. The bottom ledger board was split apart and nailed very sloppy. It could not have happened during shipping because everything looked to be packed that way in the box. I had to glue and clamp the pieces back together overnight. The finish is was also sloppy which required me to touch up a bunch of the seams. Assembly instructions are also poorly written. There are so many parts and pieces and you have to get the middle boards in exactly the correct direction - which is very hard to see in the instructions. Overall, I have purchased much better products at this price point.