Simpli Home - Warm Shaker SOLID WOOD 72 inch Wide Transitional TV Media Stand in White For TVs up to 80 inches - White

Many of the drill holes were not lined up well and needed to be repositioned slightly. A couple of pieces had cracks in the wood. Instructions were sometimes hard to follow and sequencing of construction could have been better. For example: hinges on fold down door should be done before the piece is assembled because they become less accessible after constructing and then you need a very short screwdriver or other tool adaptation. Bottom front strip was already attached but was missing a screw and one screw was stripped so it was hanging down. It will take about 6 hours to construct with 2 people if you are concerned about appearance of the piece.

This stand is holding up great. Have had it for a few years and i just love it. I got the tobacco brown and it's such a great color. I love the sturdy pine construction, it's so much better than the mdf stand i used to have. I am planning to get more pieces from this company.

I just received the Antique White color of this TV stand yesterday and assembled it last night. Overall, it's decent quality, but there were definitely a couple hiccups during assembly. The bottom piece was cracked and required gluing to make it less noticeable, and when adding the top piece, it would not fit on one of the dividers and we had to saw the piece down to make it fit (at least it was not visible after it was all said and done). And lastly, the photo makes the Antique White color look more off-white/distressed, but in person, it really has a more almond/yellow hue to it which is kind of disappointing. Overall not bad, but could be better with a couple small things.

Overall I'm enjoying my Ashley Media Cabinet. It's an attractive piece of furniture in my den. Would make two suggestions…pack it in two or three separate boxes, as without my apt complex maintenance folks, I wouldn't have been able to lift the single box myself. It took two men to push it into my apt. Also, more detail to construction for a better fit of the doors is recommended. Thankfully, my handyman had the tools and experience to tweak the hardware to make the doors look presentable. Helen

Overall happy with the product. We did assembly ourselves and it was very time consuming. Several issues during assembly: (a) Manufacturer should provide a gauge or at least specify how much of the Cam Lock Pins (part 2) should be exposed after placing them in the designated holes. If the pins are inserted too far or not enough the Cam Locks will not engage and thus will not lock. (b) Very few of the pilot holes needed for assembly were more than a slight dimple. These pilot holes need to be deep enough to get the screws started in the correct position -- we had to use an awl to make them deep enough. (c) Additionally, the pilot holes on the bottom shelf that are needed to attach the dividers (CL, CR, DL, and DR) were on the side of the wood OPPOSITE that needed for one of the dividers. In this case we had to create all new pilot holes.