SUN YELLOW 12 OZ

After using Rustoleum and experiencing bad results, I decided to give Krylon a try. BEST DECISION EVER. The nozzle sprays evenly and just the right amount so I never experienced any run or drip, and I didn't have to worry if I was spraying too close. Sprayed 1 tacky coat, then 2 wet coats 10 minutes apart, and let it dry for two days. Then sanded with 600 and I never had any issues with the next layers, in fact the newer coats ended up even nicer. After I sprayed my color, although it was suggested not to, I applied Clear Gloss on top of it the same way, about 10-12 coats (3 per day), and let it dry for a week after the final spray. Then I sanded with 1000, 1500, 2000 and 2500 grit and then hand buffed and polished. I never thought I could have this finish quality without a spray booth or spray guns. Patience is the key. Also read weather and humidity conditions before you spray, it seriously can affect your project.

Bought a can for a simple craft project. Repainting some white picture frames. Frames were brand new, clean, previously painted gloss white, not bare plastic. Sanded to a dull finish. Paint would not stick. Pulled away and orange pealed awful. Tried the paint on some parents rough plastic. It wouldn't stick. Tried on a wood broom handle . Was so thin it would have taken 4-5 coats to even start to cover. Tried on metal. Pulled away and wouldn't cover. Could not get smooth coverage on any surface. Awful awful paint. Won't be buying any more of this garbage.

This is the only paint I will use. Use it mostly on automotive parts. Works well on interior and even sprayed my Jeep 4 years ago and still no rust. Use it for anything else around the shop and house. Just need to keep tip clean and shake well like any other spray paint. Great product.

I used to love a Krylon spray paint, but something has changed and their new formula is just awful. The paint in question was 2 cans of semi-gloss white, bought on two separate dates, about 6-8 months apart. The coverage was so poor I thought that they had not shaken the can throughly, but I was mistaken - the paint coverage was just that bad. Coverage was about the consistency of sprayed milk; that is NO coverage and continuous runs. I even followed directions with multiple thin coats but still there was no coverage and it continued to run. I let the paint dry for 36 hours then tried to recoat, only to discover that the new paint wrinkled the previous cost into what looks like a wrinkle finish. This stuff is just plain awful. It also smells so bad that ventilation is a must, but the still odor remains until the paint dries. I guess the once great paint company has ceased to exist. I will never but Krylon paint again and will spread the word to avoid Krylon at all costs.

It worked on a small test sample of plastic but was a disaster on the actual model sailboat hull. As much as I hated Krylon Fusion, Colormaster is even worse. It runs, takes many, many, many, many ... coats. It lays down inconsistently with some smooth patches but mostly orange peel. Read the other reviews (wish I had) and do not use this junk. It should be taken off the market!