Trendnet Network Cable Tester

ACCURATELY CHECK CABLES & PORTS: The comprehensive cable tester for network professionals allows you to accurately check pin configurations for Ethernet cables, USB cables (with TC-NTUF sold separately), BNC cables, and patch panel ports. CABLE TESTING DISTANCE: Tests over cables lengths of up to 300 meters (984 ft.) PIN TESTING: The network cable testers identifies proper, severed, short circuit, and cross connected pins. LOCAL & REMOTE TESTING: A transmitter unit facilitates loop testing and a receiver unit allows for cable testing in locations away from the transmitter unit TRANSMITTER INTERFACE: 2 x test ports, Manual test button, Auto test button, Power/tone switch, LED indicators. RECEIVER INTERFACE: Test port, LED indicators CONTINUOUS SCAN: Continuous scan mode is design to accommodate testing with cable ends in different locations MANUAL SCAN: Manual scan is well suited for loop back cable testing COMPATIBLE CABLES: Cat 7, 6, 6e, 6a, 5, 5e, 4, 3, 3e, Coax cable, USB and 1394 cable (with TC-NTUF). Not designed for live wires. Connecting tester to a live wire may damage the tester. ALSO INCLUDED: 2x RJ-45-to-BNC Adapters, Network Patch Cable, Carry Pouch NDAA (U.S. and Canada only) TRENDnet's Network Cable Tester, model TC-NT2, is a comprehensive cable tester for network professionals. It accurately checks pin configurations for Ethernet cables, USB cables, BNC cables, and patch panel ports. The TC-NT2 identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 300 meters (984 ft.). All components fit into a handy travel case.PACKAGE CONTENTS TC-NT2 Quick Installation Guide 2x RJ-45-to-BNC adapter Network patch cable Carry pouch _DELETE_

RING TYPE 8 INCH W X 4-5/8 INCH D X 15 INCH H SIZE 6 AWG TO 250 MCM (LINE/LOAD), 6 AWG TO 350 MCM (NEUTRAL) WIRE SIZE UL 414 APPROVAL 600 V VOLTAGE RATING SURFACE MOUNTING NEMA 3R ENCLOSURE 200 AMPERE CURRENT RATING 1-PHASE 3-WIRE CIRCUIT CONFIGURATION OVERHEAD SERVICE TYPE 2 INCH AW HUB TYPE (1) 1/2 INCH, (4) (1 INCH-1-1/4 INCH-1-1/2 INCH-2 INCH) CONCENTRIC KNOCKOUT KNOCKOUT(S) 4 JAW(S) NO BYPASS SWITCH FINISH ANSI 61 GRAY ACRYLIC ELECTROCOATED INCLUDES ALUMINUM SNAP TYPE RING APPLICABLE STANDARD ANSI C12.7