Vega Bond V600 Fast Rise Closed Cell Spray Foam Insulation Kit. 2 Part Foam Sealant 600BF

What's In the Package? " Mask not Included" Closed Cell Spray Foams Kits Part A and B Spray Nozzles Spray Foam Hose 15ft and Applicator Assembly Safety Coverall Safety Glass Gloves Wrench Petroleum Jelly Instructions How To Use Vega Bond V200 Spray Foam Kit Wear your protective gear. This includes a safety glass, gloves, and a protective coverall. Thoroughly clean and dry the area you want to apply the foam. Free of dust and oil. Ensure the tanks are at optimum temperature, and if not, you can either allow them to cool down or warm them up. Do not use open flames or a blow torch to warm the tank. You can do so by keeping them at room temperature or bringing them close to a radiator heater. The temperature should least be at 70 F and above to get the best yield. Prepare your spray foam insulation kit as specified on the manual by securely connecting the hoses to the tanks It does not matter what color goes on to part A or B. Then apply petroleum jelly to the spray gun before attaching the nozzle. Shake the canisters for at least 60 seconds. Spray evenly on the intended surface by squeezing the trigger. Also, keep in mind that the spray foam rises in size and solidifies after a few minutes. Recommended thickness is 2 inches to get a solid moisture barrier. It is recommended that you change the nozzle after 8 minutes of continuous spraying or if you stop spraying for about 30 seconds. This product can not be returned as it is a regulated DG, replacement or refund may be available.

High-density Two-component, quick-cure foam that yields 600 board feet at 1-inch thickness. Provides an airtight seal and fills penetrations and cracks. Insulates rim joists, roof wall junctures, and around pipes and ducts. Protects against dust, air infiltration, and sound. R-Value R-7 per inch. Stops Mold and Moisture. Ready-to-use, disposable, and recyclable. ASTM E84 Approved Class A Building Material (Lowest Fire Spread Rate and Minimal Smoke Production) This product cannot be sold or shipped to the following states: CA, CO, DE, MA, MD, NJ, NY, WA, and VT High-density Two-component, quick-cure foam that yields 600 board feet at 1-inch thickness.|Provides an airtight seal and fills penetrations and cracks.|Insulates rim joists, roof wall junctures, and around pipes and ducts.|Protects against dust, air infiltration, and sound.|R-Value R-7 per inch.|Stops Mold and Moisture.|Ready-to-use, disposable, and recyclable.|ASTM E84 Approved Class A Building Material (Lowest Fire Spread Rate and Minimal Smoke Production)