WORX - 20V 7.25" Cordless Compound Miter Saw (1 x 4.0 Ah Battery and 1 x Charger) - Black

The Worx Nitro WX845L 20V Power Share 7.25 in. Cordless Sliding Compound Miter Saw has the power, expanded functionality, and run time needed to tackle advanced DIY projects or to use for professional work. This 20V Miter Saw is part of the Worx Nitro line of battery-powered tools, which, when paired with Power Share PRO high-capacity batteries, offer extended run times, plus more power and performance than other battery-operated tools on the market. 8-1/4 in. of maximum cutting capacity (@ 90°) gives this Sliding Miter Saw professional-grade operability (5-3/4 in. @ 45°). Work holding clamps on both sides of the blade and the extension wings hold projects of all sizes securely in place for safer, more efficient cutting, making this saw great at cutting flooring, crown molding, door frames and more. The bevel knob ranges from 0-45° allowing for perfect miter cuts, and cutting depth adjustments make partial cuts, dadoes and rabbets easy (maximum cutting thickness: 2-1/4 in @ 90°, 1.63 in. @ 45°), while the miter detents are handy for cutting the most common angles. This Sliding Miter Saw spins the 7-1/4 in. blade (5/8 in. arbor) at 3600 RPM of no-load speed. And when using a 4.0Ah Power Share PRO battery it offers longer run times than typical 20V Miter Saws. (Up to twice as long as standard 2.0Ah batteries.) It weighs only 21 lbs. so it’s easy to transport from the workshop to the jobsite, saving you the time and hassle of bringing projects back and forth.

Engineered to be easy to use and to fit into any size workshop, the 20V 7-1/4” Sliding Miter Saw from Worx will have you making a wide variety of miter and bevel cuts in no time. The easy change blade system allows for fast but safe switch-outs between blades. The dust bag and dust extraction system significantly cuts down on the amount of dust you’ll have flying through your workshop and onto your worktable. And the 3600 rpm motor makes smooth, precise cuts. The molded grip on the cutting arm allows for even, comfortable pulls. And the precision-machined guide rails are easy to adjust and hold your lumber firmly in place. What sets this saw apart from other sliding miter saws is its portable table saw design with full-size capabilities. At only 21 lbs, it’s easy to set up and move to different parts of the workshop or even take with you to the job site, yet its sturdy aluminum base gives it the leverage you need for this kind of work. With a smaller arbor, the motor can spin the blade faster than it could a full-size blade, which puts less wear and tear on the tool. This makes it more efficient and will increase the life of this saw. And the smaller footprint means you can actually keep the saw out of the way when you’re not using it.