日本
just now
Amazon
walmart
| Manufacturer | Brother |
|---|---|
| Brand | Brother |
| Item model number | sdx125e |
| Color | Blue |
| Weight | 12.8 pounds |
| Height | 6.81 inches |
| Depth | 8.47 inches |
| Product Id | 14348 |
|---|---|
| User Reviews and Ratings | 4.4 (16 ratings) 4.4 out of 5 stars |
| UPC | 012502656036 |
| # | Title | Reviews | User Ratings | Price |
|---|---|---|---|---|
| 1 |
Search on Amazon
Price:
Search
on
|
Search
on
|
||
| 2 |
Brother ScanNCut DX SDX125E Electronic Cutting Machine with Built-in Scanner
Reviews: 7
Ratings:
(7)
Price:
$419
on
|
7 | (4.4) |
$419
on
|
[This review was collected as part of a promotion.] I received this product for free from Brother in exchange for my honest opinion/review of the product. I will admit at first I was a bit intimidated of the Scan N Cut machine. I always wanted to try one and was super excited to have the opportunity. Setup was quite simply and very straight forward. The project that came with the machine took less than 2 minutes to complete. I can't wait to make more things.
[This review was collected as part of a promotion.] I have the Brother ScanNCut SDX125E. The machine came with a cardstock project as an introduction to the cutter. It was easy to complete the project by following the instructions, and it turned out nice. The cutter itself is pretty easy to set up and to use, but I had a very hard time downloading the free workspace software that Brother promotes (I was able to use the web version of the program and to register an account). I could not find a link to download the file on the Brother site, but eventually found a direct link on a blogger's site. Once that was installed on my laptop, I quickly figured out how to create a design on my laptop and have it exported to the cutter. Using additional fonts was easy as well. As a first time user of cutting machine, I wish the user manual was more detailed about how to cut vinyl vs cardstock, half cuts, etc., but I think if you already have this knowledge or look up tutorials online it will be very easy to use. I still wish I had a decent manual (without needing to download it or look to YouTube videos) that walked me through crafting several different projects. The autoblade does, indeed, detect the pressure needed for different materials! I like that I can quickly make and print labels and installed designs right from the scanner/cutter. The led touch screen makes it all so easy. It comes with a little stylus, but the screen responds to my finger just fine, albeit a little pressure is required with either method. The included designs are great, the machine is quiet, and the cuts are clean.
extremely accurate and does exactly what the cutting files say. The scanner is unique to Brother and cricut and silhouette cannot compete with this extraordinary feature.....it is almost mandatory for seeing the cutting material and the design on screen. no subscription fees like cricut....no computer needed if you do not want to use it. uses standard cvg and several other formats.
[This review was collected as part of a promotion.] I received this product for free from Brother in exchange for my honest opinion/review of the product. I was excited to get this and it was GREAT! It is a quality product. It came with tools to help you "weed" the project off the mat. I read all the instructions that came with it and the tips etc. I went thru the steps they gave you to try a project and it worked great the box turned out well. I then tried some cutouts and drawing even adding 2 of the pictures they give you into one {first pic is the image being drawn and second pic and third pic is a cutout} I got some adhesive vinyl and I made some gaming stickers for my son {fourth pic} The 5th and 6th pictures were gaming characters my son is going to use markers and color in and then cut them out later. It was so much fun. It worked very well and I had no problems with it at all. It comes with a bonus of 3 collections of projects. They are perfect to make. The software is canvas workspace and it is very easy to use. It has over 680 projects for free. We even used our own artwork and that worked well too just had to add the image to software. I cant wait to do more projects this is a wonderful product. I highly recommend this product. I just started and there are so many more things you can do.
[This review was collected as part of a promotion.] I received this product for free from Brother in exchange for my honest opinion/review of the product. All I can say is wow! I am absolutely in love with this machine! I will admit that I suffered a severe case of nerves and felt overwhelemed when I first opened the box. However, I sucked it up and got on with it, lol. First it comes very well packaged. Everything you need to get started is included. Set up was easy and I was plugged in and connected to my wifi within minutes. Setting it up was simple using the lcd screen. The machine is solid but not super heavy. I was able to get the Brother Canvas Workspace program both on my computer and online so I could work on my phone if I want to. I followed the directions in the booklet to make my first folding project but had no idea that a pen had been included so in all honesty I skipped the drawing part. I did find that there was a pen included though. When you get your machine opened and unwrapped, be sure to check both storage drawers. There's a little white pouch with utensils in the right hand side one and the pen thingy is on the left. The only thing I didn't really like is that there's no owner's manual. It comes with quick reference guides and instructions to get started, but no owner's manual. There is a website where you could download it, but I'd much rather have it in my hand. The machine comes with one sheet of card stock type paper so you will need to purchase vinyl, paper or heat transfer vinyl to make other things. It also comes with a tacky mat to hold the paper/vinyl for cutting/drawing. There is a protective cover on the mat but don't discard it when you remove it because you can reuse it to protect the tackiness of the mat when you aren't using it. Be forewarned though. When I pulled the protective covering off for the first time there was this awful chemical odor emenating from the mat. You know, sort of like the smell of a Sharpie but stronger! It has diminished over the 24 hours since I first pulled the cover off. Make sure there's nothing behind your machine because the mat flows front to back while cutting/drawing. You won't be able to put this right up near a wall because you'll need some clearance. The mat fed very easily into the machine and the lcd screen led me through the settings I needed as well as following along in the booklet that came with the machine. It was practically silent while it was cutting and the lcd screen told me how long it would take to get finished. The paper came off the mat and I was able to fold my project quickly and easily. I love the idea of being able to scan something into the machine for drawing or cutting. I found that if I had a smaller piece of vinyl, I could put it on the mat and scan it into the machine. Then, using the lcd screen, I could manipulate what it was that I wanted to cut to be sure it was able to fit on the smaller piece of vinyl. Amazing! I will say that there is a bit of a learning curve. But the machine and the software make it fairly easy. I was able to put words on my coffee maker and create t-shirts on my very first day with the machine! And I have had ZERO experience with any sort of other vinyl cutting machines. There are also TONS of how to videos on the internet. I swear we could all get lost in a sea of "how do I do......" tutorials. But mostly, it's the trial and error that we will all experience that will teach us how to truly use this fabulous machine. Overall, I'm super glad to have this machine. I can't wait to explore all it can do. I've already ordered more vinyl because my husband is already asking me to make him decals for his rc cars. Pictures of my first few projects are attached. Good luck in the vinyl cutting world!
I wish I would of snowboard about this machine before I bought my silhouette. In one day of projects I accomplished more than one year with having my silhouette.
I received it in 3 days!!! I was scared from buying but when I received it, it was totally worth it. Made my first box and absolutely LOVE IT! Its a little pricey but if your starting a small business it's definitely worth buying. I RECOMMEND IT!
[This review was collected as part of a promotion.] I received this product for free, from Brother, in exchange for my honest review. This is such a beautiful and sleek cutting machine. I'll admit that in the beginning, the software and usage, was a little overwhelming. But i was able to get the hang of it and started making stuff in no time. Mostly, I use it to make vinyl stickers for my car or for home items around the house. I love the scanning feature so much! It makes accessing designs, so much easier. I absolutely recommend this machine, if you want quality craft cuts.
[This review was collected as part of a promotion.] I received this product for Free from Brother in exchange for my honest review/opinion. The Brother SDX125e machine is very nice. The light blue color is very pretty. This machine is great for creating all types of crafty projects. You can make prints for t-shirts, face mask. You can and even create cute labels to personalize different items such as, mugs, ribbons, water bottles and much more. It was very easy to operate the Brother SDX125e device. My family and I will be creating matching t-shirt and face masks designs for our Family Vacation. Overall, this product is well worth it and is easy for most people to use for creating a multitude of projects.
The machine I received was used. The mat that holds the work was opened and was printed on making it useless. There was not shipping material. The pen cap was missing
