Atlona - 3-Input HDMI and VGA Switcher - Black AT-HDVS-150-TX





Model: AT-HDVS-150-TX
3-Input HDMI and VGA Switcher
- Detailed product description
-
Compatible with most 4K Ultra HD displays, HDMI sources and select receivers; two 328' outputs and four 230' outputs; supports up to 4096 x 2160 resolution; Dolby Atmos, Dolby TrueHD and DTS-HD Master Audio pass-through; Ethernet port; PoE (power over Ethernet)
-
Designed as a remote input device for AT-UHD-CLSO-824 matrix switchers (not included), this Atlona AT-HDVS-150-TX switcher helps extend the signal of HDMI and VGA sources over a single category cable using HDBaseT technology. Auto switching and front-panel controls offer simple operation.
Atlona - 3-Input HDMI and VGA Switcher - Black's More Specifications
Manufacturer
Atlona
Brand
Atlona
Model Number
AT-HDVS-150-TX
Color
Black
Product Weight
11.4 pounds
Product Height
1.5 inches
Product Width
5 inches
Product Depth
11.88 inches
Product Description
RS-232 - Many displays including projectors, commercial flat panel displays, and some consumer displays can be controlled using the RS-232 signal directly from the switcher. The switcher is able to send commands using RS-232 for automatic display control to compatible displays.,Education environments - The switcher is placed on a lectern for use with remote video inputs such as a laptop and document camera. Auto-switching technology selects the active source input and routes the signal via HDBaseT to the switcher downstream.,Corporate environments - The switcher is placed at a boardroom conference table to allow presenters to easily connect their laptops to the system. When integrated with a control system, commands can be sent to activate a display from the front panel of the switcher.
Atlona Three-Input Switcher for HDMI and VGA Sources with HDBaseT Output Features two HDMI inputs plus a VGA input with 3.5mm audio connector Allows advanced HDMI display devices to be used with legacy VGA sources Note: Audio signals will not pass without an accompanying video signal Transmits AV signals up to 230 ft (70m) @ 1080P and 130 ft. (40m) @ 4K/UHD using CAT6a/7 cable Uses easy-to-integrate category cable for low-cost, reliable system installation Automatically changes projector power state based on active or standby mode of the switcher (in conjunction with the AT-HDVS-150-RX). Control signals are transmitted via RS-232. Eliminates the need for a complex control system in small AV systems Selects active input when sources are connected or if there is a change in source power status Eliminates need for complex control system in AV systems Overrides auto-switching when two active sources are present