10" LED Grille for Select KICKER Subwoofers - Charcoal

▪ Audio Technica AT4033A Condenser Microphone w/ Shockmount, Dust Cover, and Case Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity

▪ The 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use Floating-construction capsule assembly provides isolation from noise and vibration Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections

▪ State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards Custom shock mount provides superior isolation Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Cardioid Frequency Response: 30-20,000 Hz

▪ Low Frequency Roll-Off 80 Hz, 12 dB/octave Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa Impedance: 100 ohms Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal) Noise: 17 dB SPL

▪ Dynamic Range (typical): 128 dB, 1 kHz at Max SPL Signal-To-Noise Ratio 77 dB, 1 kHz at 1 Pa Phantom Power Requirements: 48V DC, 3.2 mA typical Switches: Flat, roll-off; 10 dB pad (nominal) Weight: 13.4 oz (380 g) Dimensions: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter Output Connector: Integral 3-pin XLRM-type Accessories Furnished: AT8449a shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case