Pecan Shell Powder - 10-lb. by ArtMolds for Molding and Casting

ArtMolds Pecan shell flour from EnvironMolds, is a light-weight filler for urethanes. It gives a woody look to the finished product. It is used to make resins lighter, thicker, easier to sand, and to imitate wood. Use it in cold casting with a mix ratio of two parts resin to one pecan shell powder to create an imitation wood statue, carving appearance or use it a wood filler.

Pecan shell flour by ArtMolds from EnvironMolds, is a light-weight filler for urethanes. It gives a woody look to the finished product. Use to make resins lighter, thicker, more sandable, and to imitate wood. One of the best uses of pecan flour is for thickening epoxy resin when making fillets or filling wood. A common use for this is as an epoxy thickening agent for use when rebuilding rotted or termite damaged wood. It can be used with epoxy, vinyl Ester, polyester, or polyurethane resins. Make certain your pecan flour is dry before using with urethanes as even slight moisture will cause your urethane to foam. To dry the pecan flour place on a tray in the oven and heat at 150-degrees F for 1-hour. CAUTION: Over heating may cause a fire so watch the drying carefully.