13GPM Hydraulic Log Splitter Pump 2-Stage Hi/Lo Gear Pump 3000 PSI ½" Shaft

13GPM Hydraulic Log Splitter Pump 2-Stage Hi/Lo Gear Pump 3000 PSI ½" Shaft Description: -- The HI/LO section of the pump is all aluminum and the end plates are cast steel. -- Good abrasion resistance, durable.The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. -- Excellent for use on log splitters.Equipped with 1/2" pump shaft, the log separator is compatible with horizontal and vertical shaft engines. -- It greatly reduces the difficult-to-solve problems when replacing and operating products. Details: -- This 2 stage pump can give you much faster cycle times and higher possible pressures with a small engine. Excellent for use on log splitters. -- The HI/LO section of the pump is all aluminum and the end plates are cast steel. Applications for the HI/LO pump are log splitters, presses etc where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements. Features: 1. Minimum 8 HP or larger gas engine 2. For use with open center hydraulic systems only Specifications: Shaft: ½"" Inlet port: 150mm; Outlet port: 230mm Maximum pressure: 3000 PSI Bolt circle: 2.83inch Mounting hole diameter: 344inch Woodruff key: 1/8inch Rotation is clockwise 4 holes spaced 2"" on center Packing Include: 1 PC 13 GPM Hydraulic Log Splitter Pump Widely Application: Very suitable for power devices of fellers, presses, machine tools, and snowplows.

13GPM Hydraulic Log Splitter Pump 2-Stage Hi/Lo Gear Pump 3000 PSI ½" Shaft