JBL CSMA 240 Commercial 70v Amplifier+(8) 2' X 1' Drop Ceiling Tile Speakers

Package Includes: (1) JBL CSMA240 Commercial/Restaurant 2 x 40w Amplifier 4ohm/8ohm/70V/100V, 8 inputs (8) Rockville DCS6T 70V Commercial 6.5"" 2' X 1' Drop Ceiling Tile Speaker For Office Features: JBL CSMA240 Commercial/Restaurant 2 x 40w Amplifier 4ohm/8ohm/70V/100V, 8 inputs For Commercial and Industrial Use 40W into 8 or 4 Ohm Loads 5W Per Channel 8 Input Channels, 2 Output Channel Usable with 70 & 100V Systems Euroblock Mic/Line & RCA Inputs Hi-Z & 27V Phantom Power Switches Sleep Mode & 2 Auxiliary Outputs Voice Activated Ducking & Priority Mute Specifications: Maximum Output Power: 40 W per channel into 4 Ohms or 8 Ohms, 1 kHz, = 0.5% THD Insertion Loss: 1 dB maximum for 70 and 100 V outputs Continuous Power: 5 W per channel Line Output Level: 5.0 V RMS into 10 kOhms Input Sensitivity: To obtain full rated power at 8 Ohms (or 5 VRMS to line output). Mic Input: 3 mV RMS. Line Input: 775 mV RMS. RCA Input: 300 mV RMS Number of Channels: Input: 8, Output: 2. Frequency Response: Measured at 2.83 V RMS into rated load impedance at any output. 4/8 Ohms Output: 20 Hz - 20 kHz, ±2 dB. 70 V/100 V Outputs: 80 Hz - 15 kHz ±2 dB. Line Out: 20 Hz - 20 kHz, ±1 dB Total Harmonic Distortion (THD): Measured at 2.83 V RMS into rated load impedance at any output. Power Amplifier Output: <0.5%, 20 Hz to 20 kHz. Line Output: 0.05% typical Signal to Noise Ratio: > 90 dB Nominal Input Impedance: Mic: 400 Ohms. Line: 20 kOhms (balanced). RCA: 50 kOhms. Minimum Load Impedance: Low Impedance Output: 4 Ohms. 70 V Output: 120 Ohms. 100 V Output: 240 Ohms. Crosstalk: -70 dB @ 1 kHz Controls: Front Panel: 8 x Input level rotary knobs 2 x Output volume-attenuating knobs 2 x Vox adjustment switches 1 x Power switch 2 x Bass potentiometers 2 x Treble potentiometers Rear Panel: Features: Rockville DCS6T 70V Commercial 6.5"" Drop Ceiling Tile Speaker For Office/Business Built in 6.5"" highly efficient speaker pre-mounted into a ceiling tile Easy installation fits perfectly into 2 feet x 1 feet standard-sized US drop ceilings. Simply drop it in and connect the speaker wire Metal grill Works for both 70 volt and 100 volt operation or even 8 ohm Multi-tap options: 10W, 5W, 2.5W, 1.5W, 8 Ohm 30 Watts RMS power handling at 8 ohms Low profile mounting depth (3.7"") Spring loaded speaker terminals Sensitivity: 90 dB Designed to sound great for speeches, announcements, music, and chimes 105° dispersion pattern 70V Power Options:<

JBL CSMA 240 Commercial 70v Amplifier+(8) 2' X 1' Drop Ceiling Tile Speakers