INTBUYING 10inch Digital Thermal Heat Pad for Vacuum Chamber Extraction Systems (#021022)

This centigrade head pad is high-temperature made of Ni-Cr alloy electric heating wires and silicon rubber reinforced by glass fiber.It's characterized by quick heating, uniform temperature, high heat efficiency, high strentgh, convenient operation, anti-aging, safe and long lifespan. Parameter Setting: 1. Press "SET" 6 seconds till "E1" showed, 2. Press "SET" again, showed in turnE2, E3, E4,E5 C1,C2,E1; 3. "UP" or " Down" showing and modifying the exact value of the corresponding parameter Because the heating pad can not be cooled, its temperature control box can also be cooled. So control box can adjust the temperature range to wide, but the actual use do not reach the control box show. It MAX can reach 0?-80?. Parameter: Voltage: AC 110~120V Power Consumption: 220W The actual temperature when heating pad: 32?~176?(0?-80 ?) Temperature Display Range : -49?~248?(-45?~120?) Environmental Temperature : 32?~140?(0?~60?) Units: Degrees Centigrade Accuracy: +/- 0.2 Degrees Relative?Humidity : 20%~90% Heating Pad Diameter : 10inch(25.4cm) Package size: 11.8"x11.8"x5.1" (30*30*13cm) Gross weight?1.15KG(2.5lb) Items included: 1 set of 10" Vacuum Chamber Digital Heat Pad (021022)

Chamber NOT Included, Sold Separately. Heat Pad must fit correct size of chamber! Fits 5 Gallon aluminum pots and 1.6 Flat Chamber. This centigrade head pad will adhere to the bottom of the chamber with a peel and stick backing, it has safe silicone casing for insulation and resistance to heat. The heater is super accurate, and will hold a temp within a degree (depending on the environment and air movement). It will come with a full instruction to operate and adjust parameters. The controller has a temperature offset that will need to be found to set the controller accurately. Anything you attach a heat pad to will act like a heat sink. So the set temperature will be different from the actual inside temperature.