Fichiouy 13 GPM Hydraulic Log Splitter Pump Dual Stage HI/LO Pump Wood Processor 3000 PSI

This 2 stage pump can give you much faster cycle times and higher possible pressures with a small engine. Excellent for use on log splitters. 85% efficient.The HI/LO section of the pump is all aluminum and the end plates are cast steel. Applications for the HI/LO pump are log splitters, presses etc where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements. Specifications: New Hydraulic Log Splitter Pump 13 GPM Shaft: ½" Inlet port: 150mm Outlet port: 230mm Minimum 8 HP or larger gas engine. For use with open center hydraulic systems only Maximum pressure: 3000 PSI Bolt circle: 2.83in. 4 holes spaced 2" on center Mounting hole diameter: 344in Woodruff key: 1/8in Model: 10.9/2.1 Rotation is clockwise Packing Include: 1 PC 13 GPM Hydraulic Log Splitter Pump

The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient. Suggested applications: Presses, Log Splitters, Clamping Units and Compacto