3M Scotch Scotchlite Reflective Striping Tape: 1/4 in x 50 ft. (Red)

3M Scotchlite Reflective Striping Tape is a reflective film which is intended to provide light reflective properties in darkness. Safety and nighttime visibility may be improved with the 3M Scotchlite Reflective Series Film 680 product. Primary uses include commercial vehicles, cars, automobiles, boats, railroad and bus graphics; sign graphics; and striping (great for motorcycle helmets). The black film, which reflects whitish/tan at night when hit by light, has a typical coefficient of retroreflection of 30. Meets NFPA requirements. Please note 3M uses the same Scotchcal retail packaging for all their striping tapes (whether they are reflective or not); however this tape is Scotchlite reflective striping tape and the correct product numbers listed below will be on the retail packaging 79902 - 1/4 inch wide black 79905 - 1/4 inch wide blue 79903 - 1/4 inch wide gold 79907 - 1/4 inch wide orange 79904 - 1/4 inch wide red 79901 - 1/4 inch wide white (silver) 79908 - 1/4 inch wide yellow 79922 - 1/2 inch wide black 79921 - 1/2 inch wide white (silver) 79942 - 1 inch wide black 79941 - 1 inch wide white (silver) confirm 3M reflective product numbers here NOTES: As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information - Backing/Carrier: enclosed lens, retroreflective vinyl film - Adhesive: acrylic - Release Liner: polyethylene-coated paper - Thickness: 7 mils (carrier, adhesive) - Application Temperature: 50F to 100F - Service/Operating Temperature: -30F to 200F

3M Scotchlite Reflective Striping Tape is a reflective film which is intended to provide light reflective properties in darkness. Safety and nighttime visibility may be improved with the 3M Scotchlite Reflective Series Film 680 product. Primary uses include commercial vehicles, cars, automobiles, boats, railroad and bus graphics; sign graphics; and striping (great for motorcycle helmets). Please note 3M uses the same Scotchcal retail packaging for all their striping tapes (whether they are reflective or not); however, all Scotchlite reflective striping tape product numbers will start with 799 which will be on the retail packaging (e.g. 79902 is for 1/4 inch wide black). Carrier/Backing: enclosed lens, retroreflective vinyl film. Adhesive: acrylic. Thickness: 7 mils (carrier, adhesive. Application Temperature: 50F to 100F. Service/Operating Temperature: -30F to 200F. Release Liner: polyethylene-coated paper