CMS Magnetics 59lbs 3"x1/2"x1/2" Neodymium Block Magnet Epoxy Coated

This neodymium block magnet is made of a grade N45 magnetic alloy blend and is coated with epoxy. It is very powerful and has about 59 lbs holding power when pulled directly and placed on steel that is at least 3/4" thick. Hanging strength is less. This magnet has innumerable uses as a holding magnet but is also great for an assortment of both industrial and personal applications and can be used in an almost unlimited amount of ways.

This block magnet measures 3"x1/2"x1/2" and is made of neodymium, the most powerful type of magnet available. It is coated in epoxy which gives it excellent resistance against wet environments. Please note that all neodymium rare earth magnets are fragile and require extreme caution when handling due to their brittle nature and to avoid injury due to pinching. Material: Sintered NdFeB. Grade N45 Gauss Rating: 13,500 Pulling Force: 59 lbs Pole Orientation: Magnetized through the thickness, the poles are on the 3" x 1/2" surfaces. Coating: Black epoxy coated Tolerance: The tolerances of all the dimensions are +/-0.002in with coating.PLEASE NOTE: All magnets may chip and shatter, but if used correctly can last a lifetime. Keep away from pacemakers. Parential supervision advised. If damaged please dispose of completely. Shards are still magnetized and if swallowed can inflict serious damage if magnets join inside the digestive tract.