Atmor 10.5kW/240-Volt 1.65 GPM Electric Tankless Water Heater with Pressure Relief Device, On demand Water Heater

SAVE ENERGY, WATER, MONEY, TIME ? Atmor offers the efficient and convenient water heating solution you have been looking for. Atmor 10.5kW/ 240V Point-of-Use Tankless Electric Instant Water Heater provides an unlimited flow of hot water without the wait or worry of ever running out. That?s right, instant hot water on demand! Rest your mind at ease and enjoy the continuous flow of hot water whenever you want. This unit is specifically designed for a single shower. Recommended flow rate of 1.65 gallons per minute (GPM) is recommended for optimal performance (when used for a single shower, a water saver shower head required for optimal performance). Perfect for residential and commercial use, this compact unit can be installed against the wall either under the sink out of sight or near the point of use. Unit requires a 50 Amp dedicated single-phase, double pole breaker. Required wire size: 6 AWG. Standard 1/2" NPT (straight thread) fittings. Flow rate of 1.65 GPM = 45° temperature rise. For safety reasons, the included Pressure Relief Device (PRD) included must be installed on your water heater per the instructions in the owner's manual.

Atmor AT900-10 Point-of-Use Tankless Electric Instant Water Heater, 10.5 kW/240 V: 10,500-Watts Requires 6 AWG wire, 240V connection and a 50A dedicated breaker Ideal for whole bathroom setting in warm to moderate climates / Single shower application – suitable in all climates (See Sizing Guide) 3 Settings: 5.25 kW, Medium – 5.25 kW, and High – 10.5 kW Unit Dimensions (inches): 7.29 x 11.82 x 3.55 Unit Weight (lbs): 3.4 lbs Minimum Activation Rate (gpm): 0.5 Water Flow at Temperature Rise: Flow rate at 35 degrees F rise: 2.15 gal/min — Flow rate at 45 degrees F rise: 1.65 gal/min — Flow rate at 77 F rise: 0.82 gal/min Applications: 1-2 Equipped with Overheat Protection Nominal Water Volume: 0.11 gal Min. Operating Temp. (F): 36 Min. Temp (F): 65 Max Temp (F): 130 Working Pressure: 8 BAR (115 PSI) Max Tested Working Pressure: 16 BAR (230 PSI) Required Wire Size: 6 AWG Total Connection Load: 44A Watts: 10,500 Volts: 240 Phase: Single Wall Mountable: Yes Water Connection: Bottom of Unit Water Connection Size (inches): 0.5 Safety Certifications: UL Listed Warranty: 2 years (parts only ) Limited Warranty, 7 years free from Leakage