Atmor 3kW/110V Single Sink 0.5 GPM Electric Tankless Water Heater with Pressure Relief Device and 0.5 GPM Aerator

In most US homes, the heating of water is usually the second largest energy expense, after space heating and cooling. Typical storage tank water heating can account for up to 30% of the average home energy bill. Inconvenient situations such as waiting for the hot water to reach the faucet, finding yourself with no more hot water while having to wait for the tank to heat up again, or constantly heating a storage tank of water even when it is not in use all add up to this expense. What if there was an all-around solution that saves you money, time, energy, and resources? The Atmor Tankless Electric Instant Water Heater is the convenient solution you have been looking for - delivering to you an endless supply of hot water instantaneously at the point of use only when you need it. Suitable for residential and commercial applications. This compact device can be installed against the wall either under the sink out of sight or near the point of use. Unit requires a 30 Amp dedicated single-phase breaker. This is NOT a plug in unit. Required wire size: 10 AWG. Standard 1/2" NPT (straight thread) fittings. Maximum flow rate is 0.5 GPM. Please note that the 3kw/110v unit is designed for SINGLE SINK application in areas with at least 57°F ground water temps. Maximum temperature rise possible for unit is 45°F.

Ideal for single sink application in areas with at least 57° ground water temperature Maximum flow rate 0.5 GPM (Gallons per Minute) = 45° F temperature rise. Slower flow rate = higher temperature rise.Max tested working pressure: 16 BAR (230 PSI) Requires a direct connection to a 30 Amp single-phase breaker. Required wire size: 10 AWG. Not a plug-in unit. Instant and endless hot water on demand without the wait or worry of ever running out Includes a 0.5 GPM Aerator for sink faucet and Pressure Relief Device (PRD)