AUTOOL Brake Bleeder Kit,Dual Pressure, Dual Power Supply Mode,with Adjustable Pressure,DC12V,110V,Brake Fluid Pressure Bleeder Kit for All Cars, AST609

AUTOOL AST609 Automotive Brake Fluid Bleeder is a brake fluid exchanger equipment. The physical principle is to suck the brake fluid from the new fluid storage tank through a pump, and continuously pump it into the automobile brake fluid container at a specified pressure. Compared with the traditional compressing way to exchange brake fluid, this pulsating brake fluid exchanger can effectively avoid the generation of air bubbles during the filling process, thereby optimizing or avoiding the artificial exhaust process.

[Optimized Version]: This brake fluid bleeder kit has dual pressure mode, Standard mode 0-2.5 bar (5 minutes); Master mode 0-3 bar (3 minute). Please select the specific mode before starting the fluid exchange. [Two Ways of Power Supply]: can both support 12V battery and 110V or 220V socket supply. [Brand New Design]: The design of this product is very compact. With handle, easy to carry. There is a hook on the side of the product for placing the filling hose. There is a pressure gauge on the front of the product, you can see the working pressure at any time. There is also a place on the back of the product where you can put a corrosion-resistant filling bottle, where you can put 1L of new brake fluid. [High Efficiency]: Our main bleed kit requires only one person to operate and allows you to easily to use and change the brake oil. It can change four sub-pumps oil at the same time, after setting the working environment, the whole exchange process is automatic, so don't worry about being too busy. [Wide range of applicable models]: Equipped with 7 different types of adapters and toolboxes, Suitable for European, American, and Asian models. This pulsating brake oil exchange device is applicable for Dot3, Dot4, Dot5.1 brake oil standard. Compatible with Toyota, Honda, Mazda, Resachs, Lexus, BMW, Mercedes-Benz, Audi, VW, Volvo, Land Rover, Jaguar, Porsche and so on. FUNCTION INTRODUCTION: 1. Adjustable pulse oil change, which can effectively clean the pipeline and change the oil more thoroughly. 2. Powerful recovery function, it can quickly recover used brake fluid at the same time.The air inlet port has a water separating and filtering device, which can separate the moisture in the air, avoid it mixing with the oil, and ensure the quality. Operation Steps: (Warning: The specifications in the safety guidelines must be strictly complied). 1. Before start the operation, pay attention to the vehicle manufacturer's tips on maximum filling pressure and special work instructions. 2. As a matter of principle, for each model of vehicle, the guidelines and criteria provided by the manufacturer for emptying the brake equipment are always valid. 3. If there is no special state of the working pressure value in the guidelines and criteria for emptying brake equipment provided by the manufacturer, this brake fluid exchanger provides 2 pressure modes: Standard mode 0-2.5 bar (5 minutes); Fast mode 0-3 bar (3 minute). 4. The standard mode is defaulted when switch on. If a specific working pressure is required, it can be switched and it must be in a non-working state when switching. 5. Install the additional adapter, or select the appropriate adapter according to the instructions, on the vehicle's brake fluid container. 6. Connect the filling hose to the installed adapter. 7. Lift the car to the right height, unscrew the drain valve on the brake sub-cylinder, and connect the old oil bottle. 8. Turn on the switch and press the "Start" button. Check that the adapter on the brake fluid container is in the proper position and that it is sealed. If there is brake fluid overflow, press the "Stop" switch immediately and find out the cause. Initial Start-Up/Equipment Self-Emptying: Warning: in any case, air-emptying must be performed at the first start-up. 1. Place the brake fluid exchanger firmly on a flat surface. 2. Unscrew the filling sealing cover of the top cover of the fresh fluid bottle. 3. Pour new brake fluid into the new fluid bottle and insert the suction hose and pressure balancing hose into the new fluid bottle up to the bottom. 4. Place the new fluid bottle in the bracket of the brake fluid exchanger to prevent it from tipping over. 5. Connect the power supply to the brake fluid exchanger and turn on the switch. 6. Select the Standard mode, press the "Start" button, and turn off the power after 3 seconds working. 7. Brake bleeding is possible by recovering through a fresh fluid bottle until the brake fluid is purged of any air bubbles and overflowing. NOTE: 1. The brake maintenance device is to be used exclusively for filling and draining of brake fluid for brakes and clutches on motor vehicles. Any other use is considered beyond the device’s intended purpose and is prohibited. 2. It is necessary to fill the line with brake fluid to evacuate the air during the first time using. to prevent air from mixing into the vehicle through the equipment line during the brake fluid exchange, which could lead to failure. 3. Please check each connection if there is any leak, when changing oil, and whether the connecting hose is damaged, to keep the new oil filler port clean. PRODUCT SPECIFICATIONS: Voltage: 110-120V50760Hz Maximum flow: 1.2 L/min Fluid shortage protection: YES Noise：S70dB Maximum power：35W Working pressure：0.6-3.0 bar The length of the filling hose：3.5m Dimension：250X185X280mm Power Source: DC12V or 110V About AUTOOL AUTOOL has launched a series of professional automotive products, including smoke leak detectors, welding machines, head-up displays, fuel injector testers and cleaners, battery testers, electric hydraulic jacks and engine timing tools, etc. AUTOOL aims to make your car life easier and more convenient. Buy It With Confidence Our Products has obtained the certificate of conformity, Passed FCC EMC CE ROHS IC SAA CCC GS certification and test. For damage caused by non-human factors, we promise to provide a 3-year warranty, no need to purchase an additional Protection Plan. Why Choose AUTOOL Official Store? 1. Global Leading Brands ,popular among customers, worth to trust. 2. We are the Only AUTOOL Official Store in Walmart!100% original products, best price and Three-year warranty. 3. All products have been passed strict quality test before shipment, make sure high quality. Lifetime Tech Support from AUTOOL Official Store. 4. Support Wholesale Price and Dropshipping.