Bidet Sprayer Handheld Cloth Diaper Bidet Attachment for Toilet Bathroom Adjustable Water Pressure Stainless Steel Pet Shower Feminine Hygiene Support Wall or Toilet Mounted

Type: DS07 Handheld Bidet Sprayer for Toilet Material: brushed stainless steel Installations: on wall & hold it next to the toilet tank Main Functions: ?Personal Hygiene, bathroom cleaning??pets bathing , diaper washing, flush toilets etc. New technology application: To solve the problem that the pressing handle must be kept pressed for a long time in the use of the existing bidet sprayer, the new technology we use is to move the handle upwards to switch to a continuous water supply mode.?Follow these steps to help you complete the installation faster! Turn off the water supplyClose the water supply valve on the wall next to the toilet. Rotate it as clockwise as possible. Flush the toilet and hold the handle to completely empty the toilet tank.Make sure there are rubber washers at both endsMake sure the flat rubber gasket is in the top of the t valve of the Bidet (Hint: The top of the t valve is where the rotating nut is) and push down completely to tighten the connection.Connect the T valve to the hoseScrew the top of the t-valve onto the inlet valve of the toilet, where you have just unscrewed the water supply hose. Be careful not to over-tighten the connection. Screw the water supply hose to the bottom of the t-valve. Connect one end of the hand-held Washer hose to the side of the t-valve. Screw the head of the sink sprayer to the other end of the sink hose.Turn on the water and install the sprayerRe-open the water valve. If any connections are loose or leaking, you may need to add some plumber?s tape. If you do not leak, then your hand-held Bidet sprayer is installed and ready to use!

Bidet Sprayer Handheld Cloth Diaper Bidet Attachment for Toilet Bathroom Adjustable Water Pressure Stainless Steel Pet Shower Feminine Hygiene Support Wall or Toilet Mounted