Bio Bidet Discovery DLS Most Advanced Bidet Seat, Newly Designed, Advanced Toilet Seat is powered by a single (stainless steel) nozzle system with multiple spray ports

Bio Bidet The Discovery DLS About This Item Introducing the Discovery DLS - Our most advanced bidet seat to date. Boasting features such as auto open/close, UV sterilization, and an incredibly low profile design, we're excited to offer this product to our dealer community. This item has been added to the wholesale platform and is now available to order. PARTS INCLUDED # DLS Bidet Seat # Remote Control # AAA Battery # Catch Plate # T-Valve # 1/2 Conversion Nut (Optional) # Install Screw Assembly # Bidet Hose (1/2" to 1/2") # Toilet Hose (7/8" to 3/8") SEAT INSTALLATION GUIDE 1. Attaching the rubber anchors - Remove the existing toilet seat and insert the rubber anchors into the mounting holes. 2. Attaching the mounting plate - Place the catch plate and guides over the mounting holes. Insert the mounting screw and secure the catch plate to the toilet. 3. Attaching the bidet seat - Slide the bidet seat all the way on to the catch plate. 4. Seat sensor - This appliance is equipped with a seat sensor and will not function unless occupied. 5. Connecting the water hose # Close the water shutoff valve. # Flush the toilet to empty the tank. # Remove the existing water supply hose from the tank. # Install the t-valve on to the tank. # Connect the 7/8? water supply hose to the water shutoff valve and t-valve. If necessary, use the included conversion nut. # Connect the 1/2? water supply hose to the bidet seat and t-valve. # Open the water shutoff valve. # Check for any leaking or dripping. REMOTE INSTALLTION GUIDE 1. Installation a. Drill two 6mm holes on the wall that line up with the remote bracket. b. Install the wall anchors in the newly drilled holes. c. Place the remote bracket over the wall anchors. d. Use the provided screws to attach the remote control bracket to the wall. e. Place the remote control on the bracket. 2. Remote Pairing (Follow these instructions if the bidet seat is not responding to the remote) a. Unplug the bidet seat. b. Press and hold the "STOP" button on the remote until the indicator lights flash. c. Put the remote close to the bidet seat and plug it back in. d. The indicator lights will stop flashing when the remote has successfully paired. 5 YEAR PREMIER WARRANTY COVERAGE Bio Bidet warrants the DLS Discovery to be free from manufacturing defects under normal use for a period of 5 years from the date of purchase. Our obligation to you under this warranty is limited to repair or replacement, at our option, of defective products or parts, provided the products were properly installed and used in accordance with the instructions. We reserve the right to make inspections in order to determine the cause of the defect. This warranty does not apply to: a) Damage or loss from a fire, earthquake, flood, storm, etc. b) Damage or loss resulting from any unreasonable use, abuse, negligence, or proper maintenance. c) Damage or loss from improper installation, removal, repair, or modification. d) Damage or loss resulting from sediment or other matters contained in your water system. FUNCTION AND SETTING

OPEN/CLOSE COVER Open or close the lid. OPEN/CLOSE SEAT Open or close the seat. NIGHT LIGHT Turns the night light on/off. REAR Activate oscillating rear wash. Press again to turn off oscillation. DRYER Press to activate the warm air dryer.